Quickly and Easily Pass Cisco Exam with 300-710 real Dumps Updated on Sep-2025
Realistic 300-710 Dumps Questions To Gain Brilliant Result
Preparation Phase
Career Prospects
The professionals can improve their career possibilities by obtaining the certificate. With the CCNP Security certification, there are many career opportunities that the individuals can explore. Some of the available positions include an IT Security Consultant, a Senior Network Engineers, a Cybersecurity Specialist, an Infrastructure Engineer, a Network Security Specialist, a Network Security Engineer, a Network Specialist, and a Network Administrator, among others. The average remuneration outlook for the certificate holders is $100,000 per year.
Cisco 300-710 exam is ideal for network security engineers, network security analysts, network security administrators, and anyone who wants to specialize in network security. 300-710 exam assesses the candidate's knowledge of network security concepts and their ability to deploy and manage Cisco Firepower devices effectively. Candidates who pass the Cisco 300-710 exam will be able to understand the various types of threats that affect networks and how to prevent them.
NEW QUESTION # 19
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 20
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?
- A. pxGrid
- B. ISEGrid
- C. FTD RTC
- D. FMC RTC
Answer: A
Explanation:
Section: Integration
NEW QUESTION # 21
A network administrator notices that remote access VPN users are not reachable from inside the network. It is determined that routing is configured correctly, however return traffic is entering the firewall but not leaving it What is the reason for this issue?
- A. An external NAT IP address is not configured.
- B. An object NAT exemption rule does not exist at the top of the NAT table.
- C. An external NAT IP address is configured to match the wrong interface.
- D. A manual NAT exemption rule does not exist at the top of the NAT table.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212702-configure-and-verify
NEW QUESTION # 22
A network administrator wants to block traffic to a known malware site at https://www.badsite.com and all subdomains while ensuring no packets from any internal client are sent to that site.
Which type of policy must the network administrator use to accomplish this goal?
- A. SSL policy
- B. Prefilter policy
- C. DNS policy
- D. Access Control policy with URL filtering
Answer: C
NEW QUESTION # 23
What is a limitation to consider when running a dynamic routing protocol on a Cisco Secure Firewall Threat Defense device in IRB mode?
- A. Only nonbridge interfaces are supported.
- B. Only EtherChannel interfaces are supported.
- C. Only distance vector routing protocols are supported.
- D. Only link-state routing protocols are supported.
Answer: A
NEW QUESTION # 24
Refer to the exhibit. A Cisco Secure Firewall Threat Defense (FTD) device is deployed in inline mode with an inline set. The network engineer wants router R2 to remove the directly connected route 192.168.1.0/24 from its routing table when the cable between routed R1 and the Secure FTD device Is disconnected. Which action must the engineer take?
- A. Implement the Propagate Link Stale option on the Secure FTD device
- B. Disable hardware bypass on the Secure FTD device.
- C. Establish a routing protocol between R1 and R2.
- D. Implement autostate functionality on the Gi0/2 interface of R2
Answer: A
Explanation:
To ensure that router R2 removes the directly connected route for 192.168.1.0/24 from its routing table when the cable between router R1 and the Secure FTD device is disconnected, the network engineer must implement the "Propagate Link State" option on the Secure FTD device. This option allows the FTD to propagate the link state changes to adjacent devices, ensuring that the disconnection is recognized and the routing table is updated accordingly.
Steps:
Access the FTD device configuration via FMC.
Navigate to the interface settings for the relevant interfaces.
Enable the "Propagate Link State" option for the interfaces connected to R1 and R2.
Deploy the changes to the FTD device.
This configuration ensures that the link state changes are communicated to router R2, prompting it to remove the disconnected route from its routing table.
NEW QUESTION # 25
Drag and drop the configuration steps from the left into the sequence on the right to enable external authentication on Cisco FMC to a RADIUS server.
Answer:
Explanation:
Explanation:
4, 1, 2, 3
NEW QUESTION # 26
The security engineer reviews the syslog server events of an organization and sees many outbound connections to malicious sites initiated from hosts running Cisco Secure Endpoint. The hosts are on a separate network from the Cisco FTD device. Which action blocks the connections?
- A. Add a Cisco Secure Endpoint policy with the Tetra and Spero engines enabled
- B. Add the IP addresses of the malicious sites to the access control policy on the Cisco FMC
- C. Modify the policy on Cisco Secure Endpoint to enable DFC.
- D. Modify the access control policy on the Cisco FMC to block malicious outbound connections
Answer: B
NEW QUESTION # 27
Encrypted Visibility Engine (EVE) is enabled under which tab on an access control policy in Cisco Secure Firewall Management Center?
- A. Advanced
- B. Security Intelligence
- C. SSL
- D. Network Analysis Policy
Answer: A
Explanation:
Available under the Advanced tab of the access control policy, to enable or disable EVE.
https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management- center/snort/720/snort3-configuration-guide-v72/m_encrypted-visibility-engine.pdf
NEW QUESTION # 28
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. OSPFv2 with IPv6 capabilities
- B. virtual links
- C. area boundary router type 1 LSA filtering
- D. MD5 authentication to OSPF packets
- E. SHA authentication to OSPF packets
Answer: B,D
NEW QUESTION # 29
Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?
- A. The rule must define the source network for inspection as well as the port
- B. The rule is configured with the wrong setting for the source port
- C. The action of the rule is set to trust instead of allow.
- D. The rule must specify the security zone that originates the traffic
Answer: C
NEW QUESTION # 30
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. capture
- B. configure coredump packet-engine enable
- C. capture-traffic
- D. capture WORD
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/ac_1.html
NEW QUESTION # 31
An organization has a Cisco FTD that uses bridge groups to pass traffic from the inside interfaces to the outside interfaces. They are unable to gather information about neighbouring Cisco devices or use multicast in their environment. What must be done to resolve this issue?
- A. Change the firewall mode to transparent.
- B. Change the firewall mode to routed.
- C. Create a firewall rule to allow CDP traffic.
- D. Create a bridge group with the firewall interfaces.
Answer: B
NEW QUESTION # 32
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-256
- B. SHA-4096
- C. SHA-512
- D. SHA-1024
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/cisco
NEW QUESTION # 33
Which command-line mode is supported from the Cisco FMC CLI?
- A. privileged
- B. configuration
- C. admin
- D. user
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/configuration/guide/fpmc-config- guide-v66/command_line_reference.pdf
NEW QUESTION # 34
A network engineer must configure IPS mode on a Cisco Secure firewall Threat Defense device to inspect traffic and act as an IDS. The engineer already configured the passive-interface on the secure firewall threat Defence device and SPAN on the switch. What must be configured next by the engineer?
- A. DHCP on the switch
- B. active SPAN port on the switch
- C. active Interface on me Secure Firewall threat Defense device
- D. intrusion policy on the Secure Firewall Threat Defense device
Answer: D
Explanation:
To configure IPS mode on a Cisco Secure Firewall Threat Defense (FTD) device to inspect traffic and act as an IDS, the network engineer must configure an intrusion policy on the FTD device. The passive-interface and SPAN on the switch have already been configured, which means the traffic is being mirrored to the FTD.
The next step is to set up an intrusion policy that defines the rules and actions for detecting and responding to malicious traffic.
Steps:
* In FMC, navigate toPolicies > Intrusion.
* Create a new intrusion policy or edit an existing one.
* Define the rules and actions for detecting threats.
* Apply the intrusion policy to the relevant interfaces or access control policies.
This configuration enables the FTD to inspect the mirrored traffic and take appropriate actions based on the defined intrusion policy.
References:Cisco Secure Firewall Management Center Administrator Guide, Chapter on Intrusion Policies.
NEW QUESTION # 35
An administrator is adding a QoS policy to a Cisco FTD deployment. When a new rule is added to the policy and QoS is applied on 'Interfaces in Destination Interface Objects", no interface objects are available What is the problem?
- A. QoS is available only on routed interfaces, and this device is in transparent mode.
- B. A conflict exists between the destination interface types that is preventing QoS from being added
- C. The FTD is out of available resources lor use. so QoS cannot be added
- D. The network segments that the interfaces are on do not have contiguous IP space
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/quality_of_service__qos__for_firepower_threat_defense.html
NEW QUESTION # 36 
Refer to the exhibit. An engineer analyzes a Cisco Firepower Management Center dashboard. Which action must be taken by the user to decrease the risk of data loss?
- A. Stop all the URLs that are uncategorized.
- B. Block the use of Dropbox.
- C. Block all the BitTorrent applications.
- D. Stop all URLs that have an unknown reputation.
Answer: A
NEW QUESTION # 37
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?
- A. configure manager add 10.0.0.10 Cisco123
- B. configure manager add Cisco123 10.0.0.10
- C. configure manager local 10.0.0.10 Cisco123
- D. configure manager local Cisco123 10.0.0.10
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt- nw.html#id_106101
NEW QUESTION # 38
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig?
(Choose two.)
- A. BGP
- B. OSPF
- C. EIGRP
- D. static routing
- E. IS-IS
Answer: A,B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660
/fptd- fdm-routing.html
NEW QUESTION # 39
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10 10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
- A. Cisco FMC does not support devices that use IPv4 IP addresses.
- B. Update the IP addresses from IPV4 to IPv6 without deleting the device from Cisco FMC
- C. Format and reregister the device to Cisco FMC.
- D. Delete and reregister the device to Cisco FMC
Answer: B
NEW QUESTION # 40
A network administrator notices that inspection has been interrupted on all non-managed interfaces of a device. What is the cause of this?
- A. A passive interface was associated with a security zone.
- B. Multiple inline interface pairs were added to the same inline interface.
- C. The value of the highest MTU assigned to any non-management interface was changed.
- D. The value of the highest MSS assigned to any non-management interface was changed.
Answer: C
NEW QUESTION # 41
......
Start your 300-710 Exam Questions Preparation: https://www.ipassleader.com/Cisco/300-710-practice-exam-dumps.html
A Fully Updated 300-710 Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=11si2AMdRbYukhzxyY-nDVkqYxadBqmrA