Latest Cisco 300-710 Free Certification Exam Material with 378 Q&As
UPDATED 300-710 Exam Questions Certification Test Engine to PDF
The Securing Networks with Cisco Firepower certification exam consists of 60-70 multiple-choice and multiple-answer questions, and candidates have 90 minutes to complete the exam. 300-710 exam tests the candidates' knowledge of Cisco Firepower NGFW concepts, architecture, deployment, and management, as well as their ability to configure and troubleshoot Cisco Firepower NGFW features such as access control, intrusion prevention, network analysis, and malware protection. Candidates who pass the exam will earn the Cisco Certified Network Professional Security (CCNP Security) certification, which is a globally recognized credential that demonstrates their expertise in securing Cisco networks using advanced security technologies.
Cisco 300-710 (Securing Networks with Cisco Firepower) Certification Exam is designed for individuals who want to validate their knowledge and skills in implementing and managing the Cisco Firepower Next-Generation Firewall (NGFW). 300-710 exam is part of the Cisco Certified Network Professional Security (CCNP Security) certification, which is a professional-level certification that validates a candidate's ability to implement, configure, and troubleshoot Cisco network security solutions.
How to study the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
For the Securing Networks with Cisco Firepower (300-710 SNCF) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco's authorised learning partners teach instructor-led classes all over the world. E-Learning solutions are provided be Cisco for exam preparation via selp-paced online courses. 300-710 SNCF exam dumps available at certificate-questions are the most suitable study materials. We recommend that students take the 300-710 SNCF practice exams after completing all the training. Students are highly encouraged to join Cisco's Certification communinty where they can join students from all over the world and learn together. For further exam self-study materials, refer to the links down below:
Classroom Training E-Learning Certification Community Practice Exams
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to Cisco's Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
NEW QUESTION # 121
A network engineer implements a new Cisco Firepower device on the network to take advantage of its intrusion detection functionality. There is a requirement to analyze the traffic going across the device, alert on any malicious traffic, and appear as a bump in the wire How should this be implemented?
- A. Enable routing on the Cisco Firepower
- B. Specify the BVl IP address as the default gateway for connected devices.
- C. Configure a bridge group in transparent mode.
- D. Add an IP address to the physical Cisco Firepower interfaces.
Answer: D
NEW QUESTION # 122
An engineer must reconfigure an NTP server on an IPSv device that is managed by using Cisco Secure Firewall Management Center. The engineer verified secure communications between Secure Firewall Management Center and the NTP server. How must the engineer perform the reconfiguration in Secure Firewall Management Center?
- A. Devices > Platform Settings > [assigned Secure Firewall Settings Policy] > Classic managed devices
- B. Devices > Device Management > [NGIPSv device] > Device > System
- C. Devices > Platform Settings > [assigned Threat Defense Settings Policy] > Time Synchronization
- D. Devices > Device Management > Time Synchronization
Answer: C
NEW QUESTION # 123
A network engineer is configuring URL Filtering on Cisco FTD. Which two port requirements on the FMC must be validated to allow communication with the cloud service? (Choose two.)
- A. outbound port TCP/80
- B. outbound port TCP/443
- C. outbound port TCP/8080
- D. inbound port TCP/80
- E. inbound port TCP/443
Answer: A,B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Security__Internet_Access__and_Communication_Ports.html
NEW QUESTION # 124
An organization wants to secure traffic from their branch office to the headquarter building using Cisco Firepower devices, They want to ensure that their Cisco Firepower devices are not wasting resources on inspecting the VPN traffic. What must be done to meet these requirements?
- A. Configure the Cisco Firepower devices to ignore the VPN traffic using prefilter policies
- B. Tune the intrusion policies in order to allow the VPN traffic through without inspection
- C. Configure the Cisco Firepower devices to bypass the access control policies for VPN traffic.
- D. Enable a flexconfig policy to re-classify VPN traffic so that it no longer appears as interesting traffic
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/fdm/fptd-fdm-config-guide-640/fptd- fdm-ravpn.html
NEW QUESTION # 125
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. FlexConfig
- B. IRB
- C. BDI
- D. SGT
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/ Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION # 126
A company is in the process of deploying intrusion prevention with Cisco FTDs managed by a Cisco FMC.
An engineer must configure policies to detect potential intrusions but not block the suspicious traffic. Which action accomplishes this task?
- A. Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the "Drop when inline" option.
- B. Configure IDS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the "Drop when inline" option.
- C. Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by checking the "Drop when inline" option.
- D. Configure IPS mode when creating or editing a policy rule under the Cisco FMC Intrusion tab in Access Policies section by unchecking the "Drop when inline" option.
Answer: B
NEW QUESTION # 127
A network administrator reviews the file report for the last month and notices that all file types, except exe. show a disposition of unknown. What is the cause of this issue?
- A. The Cisco FMC cannot reach the Internet to analyze files.
- B. The malware license has not been applied to the Cisco FTD.
- C. A file policy has not been applied to the access policy.
- D. Only Spero file analysis is enabled.
Answer: B
NEW QUESTION # 128 
Refer to the exhibit. An engineer is configuring an instance of Cisco Secure Firewall Threat Defense with interfaces in IPS Inline Pair mode. What must be configured on interface e1/6 to accomplish the requirement?
- A. FailSafe disabled
- B. inline set MTU set to 1500
- C. propagate link state disabled
- D. security zone set to OUTSIDE_ZONE
Answer: B
NEW QUESTION # 129
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
- A. Add a Table View section to the report with the Search field defined as the network in CIDR format.
- B. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
- C. Select IP Address as the X-Axis in each section of the report.
- D. Create a custom search in Firepower Management Center and select it in each section of the report.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/Reports.html#87267
NEW QUESTION # 130
An engineer is configuring a Cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces.
Which interface mode should be used to meet these requirements?
- A. routed
- B. inline set
- C. passive
- D. transparent
Answer: B
Explanation:
Section: Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION # 131
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. subinterface
- B. bridge virtual
- C. switch virtual
- D. bridge group member
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION # 132
A network administrator is concerned about (he high number of malware files affecting users' machines. What must be done within the access control policy in Cisco FMC to address this concern?
- A. Create an intrusion policy and set the access control policy to block.
- B. Create a file policy and set the access control policy to allow.
- C. Create an intrusion policy and set the access control policy to allow.
- D. Create a file policy and set the access control policy to block.
Answer: D
NEW QUESTION # 133
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. port shutdown
- B. quarantine
- C. dynamic null route configured
- D. DHCP pool disablement
- E. host shutdown
Answer: A,B
NEW QUESTION # 134
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10 10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
- A. Delete and reregister the device to Cisco FMC
- B. Update the IP addresses from IPV4 to IPv6 without deleting the device from Cisco FMC
- C. Format and reregister the device to Cisco FMC.
- D. Cisco FMC does not support devices that use IPv4 IP addresses.
Answer: B
NEW QUESTION # 135
An administrator is working on a migration from Cisco ASA to the Cisco FTD appliance and needs to test the rules without disrupting the traffic.
Which policy type should be used to configure the ASA rules during this phase of the migration?
- A. Prefilter
- B. identity
- C. Intrusion
- D. Access Control
Answer: D
Explanation:
ACP - Every access control rule has an action that determines how the system handles and logs matching traffic. You can either perform an allow, trust, monitor, block, or block with reset action on an access control rule.
Prefilter - A rule's action determines how the system handles and logs matching traffic. You can either perform a fastpath and block.
NEW QUESTION # 136
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 137
An administrator is attempting to remotely log into a switch in the data centre using SSH and is unable to connect. How does the administrator confirm that traffic is reaching the firewall?
- A. by attempting to access it from a different workstation.
- B. by running a packet tracer on the firewall.
- C. by performing a packet capture on the firewall.
- D. by running Wireshark on the administrator's PC
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-defense-f.html#anc16
NEW QUESTION # 138
......
Get The Important Preparation Guide With 300-710 Dumps: https://www.ipassleader.com/Cisco/300-710-practice-exam-dumps.html
Get Totally Free Updates on 300-710 Dumps PDF Questions: https://drive.google.com/open?id=1so-sj3sEcckA5D9zV0kPFs5gTSB2j1mt