Quality 300-710 PDF Dumps - 300-710 Exam Questions
Most UptoDate Cisco 300-710 Exam Dumps PDF 2026
NEW QUESTION # 165
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 166
While configuring FTD, a network engineer wants to ensure that traffic passing through the appliance does not require routing or Vlan rewriting. Which interface mode should the engineer implement to accomplish this task?
- A. passive
- B. Inline set
- C. Inline tap
- D. transparent
Answer: D
NEW QUESTION # 167 
Refertothe exhibit. An engineer is analyzing a Network Risk Report from Cisco FMC. Which application must the engineer take immediate action against to prevent unauthorized network use?
- A. Kerberos
- B. TOR
- C. Chrome
- D. YouTube
Answer: B
NEW QUESTION # 168
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?
- A. configure manager local Cisco123 10.0.0.10
- B. configure manager add 10.0.0.10 Cisco123
- C. configure manager local 10.0.0.10 Cisco123
- D. configure manager add Cisco123 10.0.0.10
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt- nw.html#id_106101
NEW QUESTION # 169
Which rule action is only available in Snort 3?
- A. Alert
- B. Rewrite
- C. Pass
- D. Generate
Answer: A
NEW QUESTION # 170
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
- B. The Cisco FMC web interface prompts users to re-apply access control policies.
- C. No option to delete and re-add a device is available in the Cisco FMC web interface.
- D. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
- E. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
Answer: B,E
NEW QUESTION # 171
An engineer is attempting to add a new FTD device to their FMC behind a NAT device with a NAT ID of ACME001 and a password of Cisco388267669. Which command set must be used in order to accomplish this?
- A. configure manager add DONTRESOLVE <FMC IP> AMCE001 <registration key>
- B. configure manager add <FMC IP> registration key> ACME001
- C. configure manager add <FMC IP> ACME0O1 <registration key>
- D. configure manager add ACME001 <registration key> <FMC IP>
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118596-configure-firesight-00.html
NEW QUESTION # 172
A network engineer implements a new Cisco Firepower device on the network to take advantage of its intrusion detection functionality. There is a requirement to analyze the traffic going across the device, alert on any malicious traffic, and appear as a bump in the wire How should this be implemented?
- A. Configure a bridge group in transparent mode.
- B. Add an IP address to the physical Cisco Firepower interfaces.
- C. Enable routing on the Cisco Firepower
- D. Specify the BVl IP address as the default gateway for connected devices.
Answer: A
Explanation:
Explanation
Traditionally, a firewall is a routed hop and acts as a default gateway for hosts that connect to one of its screened subnets. A transparent firewall, on the other hand, is a Layer 2 firewall that acts like a "bump in the wire," or a "stealth firewall," and is not seen as a router hop to connected devices. However, like any other firewall, access control between interfaces is controlled, and all of the usual firewall checks are in place. Layer
2 connectivity is achieved by using a "bridge group" where you group together the inside and outside interfaces for a network, and the ASA uses bridging techniques to pass traffic between the interfaces. Each bridge group includes a Bridge Virtual Interface (BVI) to which you assign an IP address on the network. You can have multiple bridge groups for multiple networks. In transparent mode, these bridge groups cannot communicate with each other.
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/general/asa-97-general-config/intro-fw.h
NEW QUESTION # 173
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events filing the database and overloading the Cisco FMC. A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
- A. Increase the number of entries on the NAT device.
- B. Change the method to TCP/SYN.
- C. Exclude load balancers and NAT devices.
- D. Leave default networks.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Netwo
NEW QUESTION # 174
An organization is migrating their Cisco ASA devices running in multicontext mode to Cisco FTD devices. Which action must be taken to ensure that each context on the Cisco ASA is logically separated in the Cisco FTD devices?
- A. Configure a container instance in the Cisco FTD for each context in the Cisco ASA.
- B. Add the Cisco FTD device to the Cisco ASA port channels.
- C. Configure the Cisco FTD to use port channels spanning multiple networks.
- D. Add a native instance to distribute traffic to each Cisco FTD context.
Answer: B
NEW QUESTION # 175
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. virtual links
- B. MD5 authentication to OSPF packets
- C. OSPFv2 with IPv6 capabilities
- D. SHA authentication to OSPF packets
- E. area boundary router type 1 LSA filtering
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION # 176
Which two routing options are valid with Cisco FTD? (Choose Two)
- A. BGPv4 with nonstop forwarding
- B. ECMP with up to three equal cost paths across multiple interfaces
- C. BGPv4 in transparent firewall mode
- D. BGPv6
- E. ECMP with up to three equal cost paths across a single interface
Answer: D,E
NEW QUESTION # 177
Which group within Cisco does the Threat Response team use for threat analysis and research?
- A. OpenDNS Group
- B. Cisco Network Response
- C. Cisco Deep Analytics
- D. Cisco Talos
Answer: D
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/products/security/threat-response.html#~benefits
NEW QUESTION # 178
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Explanation
Answer:
Explanation:
NEW QUESTION # 179
Refer to the exhibit.
A systems administrator conducts a connectivity test to their SCCM server from a host machine and gets no response from the server. Which action ensures that the ping packets reach the destination and that the host receives replies?
- A. Create an access control policy rule that allows ICMP traffic.
- B. Configure a custom Snort signature to allow ICMP traffic after Inspection.
- C. Create an ICMP allow list and add the ICMP destination to remove it from the implicit deny list.
- D. Modify the Snort rules to allow ICMP traffic.
Answer: A
NEW QUESTION # 180
A company is deploying a Cisco Secure IPS device configured in inline mode with a single Interface set that contains four interface pairs. Which two configurations must be implemented to allow the IPS device to uniquely identify packet flows and prevent the reporting of duplicate traffic and false positives? (Choose two.)
- A. Reassign the interface pairs to separate inline sets
- B. Change the MTU for the inline set to at least 1518
- C. Modify the security zones used by the Cisco Secure IPS device
- D. Set the source SPAN ports to tx only on the switches connected to the IPS interfaces
- E. Reconfigure access rules to drop all but the first occurrence of the packet
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ips_device_deployments_and_configuration.pdf
NEW QUESTION # 181
An analyst using the security analyst account permissions is trying to view the Correlations Events Widget but is not able to access it. However, other dashboards are accessible. Why is this occurring?
- A. An API restriction within the Cisco FMC is preventing the widget from displaying.
- B. The widget is configured to display only when active events are present.
- C. The widget is not configured within the Cisco FM
- D. The security analyst role does not have permission to view this widget.
Answer: C
NEW QUESTION # 182
An engineer is configuring a new dashboard within Cisco Secure Firewall Management Center and is having trouble implementing a custom widget. When a custom analysis widget is configured, which option is mandatory for the system to display the information?
- A. results
- B. filter
- C. title
- D. table
Answer: D
Explanation:
The following items are required:
- Table (required): The table of events or assets that contains the data the widget displays.
- Field (required): The specific field of the event type you want to display. To show data over time (line graphs), choose Time. To show relative occurrences of events (bar graphs), choose another option.
- Aggregate (required): The aggregation method configures how the widget groups the data it displays. For most event types, the default option is Count.
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/dashboards.html
NEW QUESTION # 183
An engineer is configuring URL filtering for a Cisco FTD device in Cisco FMC. Users must receive a warning when they access http:/'www.Dac'additstte.corn with the option of continuing to the website if they choose to. No other websites should be blacked. Which two actions must the engineer lake to meet these requirements? (Choose two.)
- A. On the HTTP Responses tab of the access control policy editor, sot the Interactive Block Response Page to system-provided.
- B. On the HTTP Responses tab of the access control policy editor, set the Block Response Page to Custom.
- C. Configure an access control rule that matches an URL object for http://www.badaduitslte.com; and set the action to interactive Block.
- D. Configure an access control rule that matches the Adult URL category and se: the action to interactive Block.
- E. Configure the default action for the access control policy to Interactive Block.
Answer: A,C
Explanation:
To configure URL filtering for a Cisco FTD device in Cisco FMC, and to meet the requirements of the question, the engineer must do the following:
On the HTTP Responses tab of the access control policy editor, set the Interactive Block Response Page to system-provided. This will enable the system to display a warning page to the users when they try to access a blocked URL, and give them the option to continue or cancel. The system-provided page is a default page that contains a generic message and a logo1.
Configure
an access control rule that matches an URL object for http://www.badadultsite.com; and set the action to Interactive Block. This will apply the interactive block action to the specific URL that is defined in the URL object. The interactive block action will trigger the interactive block response page that was configured in the previous step1.
The other options are incorrect because:
On the HTTP Responses tab of the access control policy editor, setting the Block Response Page to Custom will not affect the interactive block action. The block response page is used when the action is set to Block, not Interactive Block1.
Configuring the default action for the access control policy to Interactive Block will apply the interactive block action to all URLs that are not matched by any access control rule. This will not meet the requirement of blocking no other websites1.
Configuring
an access control rule that matches the Adult URL category and sets the action to Interactive Block will apply the interactive block action to all URLs that belong to the Adult category. This will not meet the requirement of blocking only http://www.badadultsite.com1.
NEW QUESTION # 184
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
- A. TAP mode
- B. strict TCP enforcement
- C. propagate link state
- D. transparent inline mode
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION # 185
An engineer is configuring Cisco Security Devices by using Cisco Secure Firewall Management Center.
Which configuration command must be run to compare the CA certificate bundle on the local system to the latest CA bundle from the Cisco server?
- A. configure cert-update compare
- B. configure cert-update run-now
- C. configure cert-update auto-update enable
- D. configure cert-update test
Answer: A
NEW QUESTION # 186 
Refer to the exhibit. An engineer analyzes a Cisco Firepower Management Center dashboard. Which action must be taken by the user to decrease the risk of data loss?
- A. Block all the BitTorrent applications.
- B. Block the use of Dropbox.
- C. Stop all URLs that have an unknown reputation.
- D. Stop all the URLs that are uncategorized.
Answer: D
NEW QUESTION # 187
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-256
- B. SHA-4096
- C. SHA-512
- D. SHA-1024
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/cisco
NEW QUESTION # 188
Refer to the exhibit.
An engineer generates troubleshooting files in Cisco Secure Firewall Management Center (FMC). A successfully completed task Is removed before the files are downloaded. Which two actions must be taken to determine the filename and obtain the generated troubleshooting files without regenerating them? (Choose two.)
- A. Use an FTP client Hi expert mode on Secure FMC lo upload the files to the FTP server.
- B. Go to the same screen as shown in the exhibit, click Advanced Troubleshooting, enter the rile name, and then start the download
- C. Go to expert mode on Secure FMC. list the contents of/Var/common, and determine the correct filename from the output
- D. Click System Monitoring, men Audit to determine the correct filename from the line containing the Generate Troubleshooting Files string.
- E. Connect to CU on the FTD67 and FTD66 devices and copy the tiles from flash to the PIP server.
Answer: C,D
Explanation:
If a task to generate troubleshooting files in Cisco Secure Firewall Management Center (FMC) is completed successfully but removed before the files are downloaded, the following steps can be taken to determine the filename and obtain the generated troubleshooting files without regenerating them:
* Go to expert mode on Secure FMC:
* Access expert mode on the FMC via SSH or the console.
* List the contents of the directory/var/commonto locate the generated troubleshooting files. Use the commandls /var/common.
* Use the System Monitoring Audit logs:
* In FMC, navigate toSystem > Monitoring > Audit.
* Find the line containing the "Generate Troubleshooting Files" string to determine the correct filename.
These actions help identify and retrieve the generated troubleshooting files without the need to regenerate them, saving time and resources.
References:Cisco Secure Firewall Management Center Administrator Guide, Chapter on Troubleshooting and File Management.
NEW QUESTION # 189
......
The Cisco 300-710 exam consists of 60-70 questions and is available in English and Japanese. Candidates have 90 minutes to complete the exam and must achieve a passing score of 70% or higher to obtain the certification. 300-710 exam covers a range of topics, including NGFW features and capabilities, FMC configuration and management, ISE deployment and configuration, and threat defense technologies such as Intrusion Prevention System (IPS), Advanced Malware Protection (AMP), and URL Filtering.
100% Free CCNP Security 300-710 Dumps PDF Demo Cert Guide Cover: https://www.ipassleader.com/Cisco/300-710-practice-exam-dumps.html
PDF Exam Material 2026 Realistic 300-710 Dumps Questions: https://drive.google.com/open?id=11si2AMdRbYukhzxyY-nDVkqYxadBqmrA