Best Quality Network Appliance NS0-162 Exam Questions iPassleader Realistic Practice Exams [2022]
Critical Information To NetApp Certified Data Administrator, ONTAP Pass the First Time
NEW QUESTION 22
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. NFS
- B. ISCSI
- C. NVMe
- D. SMB
Answer: A,B
NEW QUESTION 23
Exhibit.
Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?
- A. FC has not been licensed on the cluster.
- B. NVMe is not licensed on the cluster.
- C. FC switch zoning has not been done correctly.
- D. NVMe Is not configured for the SVM.
Answer: D
NEW QUESTION 24
After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports. In this scenario, which two methods would accomplish this task? (Choose two.)
- A. Use the command line interface.
- B. Use Active IQ Unified Manager.
- C. Use ONTAP System Manager.
- D. Use Active IQ Config Advisor.
Answer: C,D
NEW QUESTION 25
Which type of SVM presents a cluster as a single manageable entity?
- A. admin SVM
- B. system SVM
- C. node SVM
- D. cluster SVM
Answer: A
NEW QUESTION 26
Exhibit.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?
- A. Enable Kerberos in the export policy.
- B. Add SMB/CIFS to the access protocols.
- C. Add HOST 3's IP address to the NFS export policy.
- D. Add NFSv4 to the access protocols.
Answer: A
NEW QUESTION 27
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task? (Choose three.)
- A. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.
- B. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
- C. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
- D. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
- E. Enable jumbo frames with an MTU of 9216 for your switches.
Answer: C,D,E
NEW QUESTION 28
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Synchronize the ONTAP Cluster time to the Active Directory time.
- B. Set the user permission for the share to write.
- C. Allow the file type *, rtf In the CIFS Server fpolicy.
- D. Let the user save the file to a writeable location.
Answer: D
NEW QUESTION 29
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Let the user save the file to a writeable location.
- B. Synchronize the ONTAP Cluster time to the Active Directory time.
- C. Set the user permission for the share to write.
- D. Allow the file type *, rtf In the CIFS Server fpolicy.
Answer: B
NEW QUESTION 30
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.)
- A. ONTAP CLI
- B. Active IQ Unified Manager
- C. Active IQ Config Advisor
- D. ONTAP System Manager
Answer: A,D
NEW QUESTION 31
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the data-protocol option
- B. the failover-policy option
- C. the auto-revert option
- D. the subnet-name option
Answer: B
NEW QUESTION 32
Exhibit.
Miss-----------------
The availability of the remote cluster in the peering relationship shows "Partial." Referring to the exhibit, what is the reason for this status message?
- A. Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.
- B. The local cluster is unable to authenticate successfully to the remote cluster.
- C. The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.
- D. The remote cluster does not have its cluster license applied properly.
Answer: D
NEW QUESTION 33
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The volume is not mounted In the namespace.
- B. The host IP address does not match the export policy rule.
- C. The logical Interface does not allow the NFSv3 protocol.
- D. The volume is in read-only.
Answer: B
NEW QUESTION 34
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.)
- A. Active IQ Unified Manager
- B. ONTAP CLI
- C. ONTAP System Manager
- D. Active IQ Config Advisor
Answer: C,D
NEW QUESTION 35
Which configuration Is supported using NetApp's All SAN Array (ASA)?
- A. 24-node cluster
- B. single node cluster
- C. 2-node cluster
- D. 12-node cluster
Answer: C
NEW QUESTION 36
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
- A. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.
- B. The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.
- C. The latest available Images will appear In the ONTAP System Manager interface.
- D. The update history is available within the ONTAP System Manager interface.
Answer: C,D
NEW QUESTION 37
Your company requires that all data must be encrypted inflight to prevent data from falling into the wrong hands.
What are two ways to accomplish this task? (Choose two.)
- A. Ensure that Snap Mirror compression is enabled in all Snap Mirror relationships.
- B. Ensure that all inter cluster replication traffic is done through a VPN tunnel.
- C. Enable Multi-Factor Authentication (MFA) for your Snap Mirror relationships.
- D. Modify your cluster peering relationships to support cluster peering encryption.
Answer: B,D
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, whi ch LIF role is required to copy to cloud with this NetApp Data Availability Services (NDAS) solu tion?
- A. data
- B. inter cluster
- C. node management
- D. cluster
Answer: B
NEW QUESTION 39
An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?
- A. SnapMirror Synchronous (SMS)
- B. SyncMlrror
- C. SVM Disaster Recovery (SVM DR)
- D. SnapMirror Business Continuity (SM-BC)
Answer: A
NEW QUESTION 40
Which configuration Is supported using NetApp's All SAN Array (ASA)?
- A. single node cluster
- B. 2-node cluster
- C. 24-node cluster
- D. 12-node cluster
Answer: C
NEW QUESTION 41
Your ONTAP cluster serves data and backup traffic running on the same physical port. You must isolate backup traffic from your production network traffic.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. Create a namespace.
- B. Create IPspaces.
- C. Create a broadcast domain.
- D. Create a VLAN.
Answer: C,D
NEW QUESTION 42
You setting up replication between two clusters.
In this scenario, which two components are required to set up the cluster peering? (Choose two.)
- A. DNS service on each cluster.
- B. An intercluster LIF on only the epsilon node.
- C. An intercluster LIF on every node.
- D. ICMP service between clusters.
Answer: C,D
NEW QUESTION 43
Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator. Which ONTAP feature fulfills this requirement?
- A. SnapVault software
- B. SnapLock Compliance
- C. SnapMlrror software
- D. SnapLock Enterprise
Answer: A
NEW QUESTION 44
You ate the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an Important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario?
- A. On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.
- B. On the cluster CLI, execute the volume snapshot restore-file command with the options to select the Snapshot, path, and restore-path
- C. In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest Snapshot copy.
- D. In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.
Answer: D
NEW QUESTION 45
......
NetApp NS0-162 Exam Certification Details:
| Exam Price | $150 USD |
| Duration | 90 minutes |
| Exam Name | Data Administrator ONTAP |
| Sample Questions | NetApp NS0-162 Sample Questions |
| Number of Questions | 60 |
| Exam Code | NS0-162 NCDA ONTAP |
| Exam Registration | PEARSON VUE |
| Passing Score | 64% |
| Recommended Training | ONTAP Cluster Fundamentals (WBT) ONTAP Cluster Administration (ILT) ONTAP Data Protection Fundamentals (WBT) |
NetApp NS0-162 Exam Topics:
| Section | Objectives |
|---|---|
| Data Protection | -Describe how to use ONTAP data protection solutions. -Describe how to use SnapMirror. -Identify MetroCluster concepts. |
| NAS Solutions | -Describe how to use NAS solutions. -Demonstrate knowledge of how to troubleshoot NAS solutions. |
| Core ONTAP | -Describe ONTAP system management. -Describe high availability concepts. -Describe how to manage Storage Virtual Machines (SVM). |
| Performance | -Demonstrate knowledge of how to administer ONTAP performance. -Demonstrate knowledge of how to troubleshoot storage system performance. |
| Security | -Describe protocol security. -Describe security hardening. -Describe inflight or at rest encryption. -Identify SnapLock concepts. |
| Networking | -Describe how to use network components. -Demonstrate knowledge of how to troubleshoot network components. |
| SAN Solutions and Connectivity | -Describe how to use SAN solutions. -Demonstrate knowledge of how to troubleshoot SAN solutions. |
| Logical Storage | -Describe how to use logical storage features. -Describe NetApp storage efficiency features. -Describe NetApp ONTAP Data Fabric solutions. |
| Storage Platforms | -Describe knowledge of physical storage systems. -Describe software-defined on-premises or cloud storage systems. -Describe how to upgrade or scale ONTAP clusters. |
NS0-162 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.ipassleader.com/NetworkAppliance/NS0-162-practice-exam-dumps.html
Best Quality Network Appliance NS0-162 Exam Questions: https://drive.google.com/open?id=1bPIsbk6DpideN2AATdDsCD6jl-0Wexst