Pass Your Network Appliance Exam with NS0-183 Exam Dumps (Updated 145 Questions)
NS0-183 Exam Dumps - Network Appliance Practice Test Questions
Network Appliance NS0-183 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 69
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. Advanced Drive Partitioning
- B. password
- C. node management IP
- D. cluster management IP
- E. intercluster IP
Answer: C,D,E
NEW QUESTION 70
Which two configurations use root-data-data partitioning? (Choose two.)
- A. AFF A220 with 3.8 TB internal SSD drives
- B. AFF A800 with 3.8 TB internal NVMe SSD drives
- C. FAS8080 with 1.8 TB external SAS drives
- D. FAS2650 with 1.8 TB internal SAS drives
Answer: A,B
NEW QUESTION 71
You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?
- A. 0/13 to 0/16
- B. 1/21 to 1/24
- C. 0/1 and 0/2
- D. 1/31 and 1/32
Answer: D
NEW QUESTION 72
You are using a NetApp CN1610 cluster-interconnect switch and need to connect a new AFF A800A node to the switch.
In this scenario, how many Ethernet ports per node are required on each switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 73
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure DNS on the cluster.
- B. Configure a firewall policy and allow SNMP.
- C. Configure an SNMP community string on the cluster.
- D. Configure a trap host on the cluster.
Answer: A,D
Explanation:
Explanation/Reference: http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-
525CBCFB-E855-4FE6-B975-0AB69F499110.html
NEW QUESTION 74
You installed a new AFF A800 2-node ONTAP 9.5 cluster and are asked to run diagnostics to validate the hardware.
Which command is used from the loader prompt to enter diagnostics?
- A. sldiag
- B. boot_diags
- C. printenv
- D. savenv
Answer: B
NEW QUESTION 75
You are preparing for a new installation. While determining the most suitable version of ONTAP software to deploy, you want to verify the ONTAP 9 release cadence to ensure that you are deploying a Long Term Service (LTS) release.
In this scenario, where would you find this information?
- A. Visit the NetApp Support site.
- B. Visit the Hardware Universe site.
- C. Visit the Interoperability Matrix Tool site.
- D. Visit the ONTAP 9 Documentation Center site.
Answer: D
NEW QUESTION 76
While preparing for a new ONTAP installation, you discover an issue with the controllers that are running ONTAP 9.5. The issue is not affecting controllers that are running ONTAP 9.4 with the latest patch version. In this scenario, which two steps should you perform to solve the problem? (Choose two.)
- A. If the controllers are in a Product Support Bulletin with ONTAP 9.5, open a case and wait for support to provide a patch release.
- B. Review the issue with the customer's deployment to see if it would be affected.
- C. Download ONTAP 9.4 with the latest patch version and ONTAP 9.5 for an eventual rollback on the day of the installation.
- D. Inform your customer that they must always install the latest supported ONTAP release.
Answer: A,B,C
NEW QUESTION 77
You are adding two new nodes to an existing switchless 2-node cluster. In this scenario, which two statements are true? (Choose two.)
- A. You must make sure that the existing nodes are healthy and that all cluster links are up.
- B. The existing cluster must use clustered Data ONTAP 8.1 or later software.
- C. You first need to install the cluster interconnect switches to the existing cluster.
- D. You need to schedule downtime to add these two nodes.
Answer: A,C
NEW QUESTION 78
After completing the installation of a DS224C shelf, you observe the error shown in the exhibit.
Which action should you take to troubleshoot the error? (Choose two.)
- A. Reconnect the SAS cable.
- B. Re-seat the SAS card.
- C. Re-seat the IOM module.
- D. Perform a takeover-giveback.
Answer: A,C
NEW QUESTION 79
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
- A. Hardware Universe
- B. Active IQ System Manager
- C. Interoperability Matrix Tool
- D. Active IQ Config Advisor
Answer: C,D
NEW QUESTION 80
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)
- A. registering for access to the NetApp Support site
- B. performing database application data migrations
- C. logging the customer support calls
- D. accessing internal NetApp KB articles
Answer: A,B
NEW QUESTION 81
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. SSH
- B. serial port
- C. SFP+ port
- D. rlogin
Answer: A,B
NEW QUESTION 82
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 83
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A capacity license is required.
- B. A site license is required.
- C. A subscription license is required.
- D. No license is required.
Answer: A
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/7336-tr4743.pdf (27)
NEW QUESTION 84
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A. 9b/1b
- B. 9a/1d
- C. 9a/1a
- D. 9c/1a
Answer: B
NEW QUESTION 85
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. system SVM
- B. data SVM
- C. multitenancy node SVM
- D. admin SVM
Answer: B
NEW QUESTION 86
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A. The ports of cluster1-02 are missing in the broadcast domain.
- B. The LIF has to be configured with a failover group.
- C. The broadcast-domain MTU needs to be either 1500 or 9000.
- D. Port a0a of node cluster1-01 is down.
Answer: C
NEW QUESTION 87
You are performing an automated upgrade of a 2-node cluster. Node-01 upgrades successfully. But during the node-02 upgrade, there is a power outage at the site. When power is restored and the nodes are booted, you receive this message: Warning: The Cluster is in a mixed version state. Update all of the nodes to the same version as soon as possible.
In this scenario, which command provides information that will help you understand the problem?
- A. system node image show
- B. system node upgrade show-task-status
- C. system node upgrade-revert show
- D. system node image package show
Answer: C
NEW QUESTION 88
A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality?
- A. Evaluation License
- B. Standard License
- C. Demo License
- D. Site License
Answer: D
NEW QUESTION 89
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure DNS on the cluster.
- B. Configure a firewall policy and allow SNMP.
- C. Configure an SNMP community string on the cluster.
- D. Configure a trap host on the cluster.
Answer: A,D
NEW QUESTION 90
......
Pass Your NS0-183 Exam Easily with Accurate PDF Questions: https://www.ipassleader.com/NetworkAppliance/NS0-183-practice-exam-dumps.html