Unique Top-selling H35-910-ENU Exams - New 2021 Huawei Pratice Exam [Q15-Q37]

Share

Unique Top-selling H35-910-ENU Exams - New 2021 Huawei  Pratice Exam

Huawei-certification Dumps H35-910-ENU Exam for Full Questions - Exam Study Guide

NEW QUESTION 15
What are the biggest differences between high-altitude helmets and ground-operated helmets? (Multiple choice)

  • A. Aerial work helmets are designed with vents
  • B. The weight of the aerial work helmet is relatively light
  • C. The aerial work helmet is designed without a hat (or a very small size hat)

Answer: A,C

 

NEW QUESTION 16
Regarding the work high above the ground PPE, which is the correct statement?

  • A. When work high above the ground, all workers must wear appropriate personal protective equipment.
  • B. When work high above the ground, personal protective equipment may not be provided for skilled tower workers.
  • C. When work high above the ground, the tower worker can choose any personal protective equipment that he likes to wear.

Answer: A

 

NEW QUESTION 17
Which of the following descriptions of the operation is wrong?

  • A. White cable tie for outdoor cable
  • B. The robustness of the OT terminal is very important.
  • C. Wear an ESD-preventive wrist strap when you remove the card.
  • D. When drilling holes in the ground, use vacuum cleaner to suck dust

Answer: A

 

NEW QUESTION 18
Which board of the BBU3900 is connected to the DC power cable?

  • A. FAN
  • B. UPEU
  • C. UMPT
  • D. UBBP

Answer: B

 

NEW QUESTION 19
The use of a combiner can effectively save feeder resources.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 20
Which of the following 1U heights is correct?

  • A. 44.44mm
  • B. 46mm
  • C. 45mm
  • D. 44.45mm

Answer: D

 

NEW QUESTION 21
The equipotential link between APM30 and IBBS200, APM30 and RFC scenarios, and which device will eventually access the ground row?

  • A. APM30, RFC
  • B. IBBS200, APM30
  • C. Both have APM30
  • D. IBBS200, RFC

Answer: D

 

NEW QUESTION 22
What is the minimum number of cables connected to the RRU? (The power cable is 1)

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 23
In the product hard-mounted quality standard, how much degrees does the directional antenna azimuth error not exceeding?

  • A. ± 5
  • B. ± 0.3
  • C. ± 0.5
  • D. ± 3

Answer: A

 

NEW QUESTION 24
What is the correct statement about the seat belt on the car?

  • A. When you drive, be sure to fasten your seat belt. You don't have to take it when you drive.
  • B. When driving slowly, you don't have to wear a seat belt.
  • C. When you drive or ride, please fasten your seat belt

Answer: C

 

NEW QUESTION 25
Which of the following is true about the height of BBU3900 device?

  • A. 1U
  • B. 2U
  • C. 4U
  • D. 3U

Answer: B

 

NEW QUESTION 26
The location of the supplier communication equipment connected to the power supply output breaker of the equipment room should be determined according to which of the following options? (Multiple choice)

  • A. Design documents
  • B. Connected on the large rated output terminal
  • C. Customer-reserved terminals
  • D. Check the available idle terminals on site

Answer: A,C

 

NEW QUESTION 27
Which of the following tasks does the verification phase of "High Risk Operation" need to complete? (Multiple choice)

  • A. Confirm that the service side is normal
  • B. Switching test
  • C. Check whether the alarms and performance events on the live network are normal.
  • D. Confirm that the cutover or expansion equipment is working properly.

Answer: A,B,C,D

 

NEW QUESTION 28
What are the following stages of the "high-risk operation" process? (Multiple choice)

  • A. Preparation stage
  • B. Verification phase
  • C. Implementation phase
  • D. Confirmation phase
  • E. Closed loop phase

Answer: A,B,C,E

 

NEW QUESTION 29
Which of the following security incident has the most influential?

  • A. Inadvertently dropping the tool, causing damage to the cooling fan blade
  • B. Barbaric work causes the cabinet door to be deformed and cannot be closed.
  • C. Power supply short circuit caused by DC power distribution operation in the equipment room
  • D. The cable connector of the climbing operation falls into the frame and poses a safety hazard.

Answer: C

 

NEW QUESTION 30
What should I pay attention to when CPRI fiber placement between RRU and BBU? (Multiple choice)

  • A. The fiber between RRU and BBU needs to choose yellow fiber type.
  • B. The optical module is exposed to the external environment for a long time, which may cause abnormal performance of the optical module. Therefore, after unpacking the optical module, the optical fiber must be inserted within 20 minutes, and the optical fiber is not allowed to be inserted for a long time.
  • C. When installing CPRI cable, the CFRI cable must be connected correctly at one time. Otherwise, the RRU may be abnormal and the cell is unavailable.
  • D. The fiber optic connector must be covered with a dust cap when not in use.

Answer: B,C,D

 

NEW QUESTION 31
What is the correct posture of the head needing to keep when carrying heavy loads by hand?

  • A. Level
  • B. Looking at the ground
  • C. Looking at heavy objects

Answer: A

 

NEW QUESTION 32
Which of the following are part of the site connection diagram? (Multiple choice)

  • A. Transmission line connection diagram
  • B. Power line connection diagram
  • C. Monitoring line connection diagram
  • D. Grounding line connection diagram
  • E. Construction drawing

Answer: A,B,C,D

 

NEW QUESTION 33
How many cm is the distance between the signal cable label and the connector?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 34
Which of the following operations should be included before a normal cutover, data modification, or upgrade operation? (Multiple Choice)

  • A. Equipped with experts for rear support
  • B. Develop detailed operational technical solutions
  • C. Send back to the company for data inspection
  • D. Preparing safe reversal measures

Answer: A,B,C,D

 

NEW QUESTION 35
Which of the following description is correct about the operation requirement?

  • A. Before entering the feed window, the power cord and fiber should be made to avoid the bay.
  • B. Before entering the feed window, in addition to the fiber, the feeder and power line need to be used as a water bay.
  • C. All cables need to be used as a water-proof bay before entering the feeding window. The smaller the bending radius, the better.
  • D. Before entering the room from the window, only the power cord is needed to avoid the bay.

Answer: A

 

NEW QUESTION 36
What is the minimum wireless coverage area of covering a certain geographical area?

  • A. Frequency band
  • B. Community
  • C. Sector
  • D. Site

Answer: C

 

NEW QUESTION 37
......

Best way to practice test for Huawei H35-910-ENU: https://www.ipassleader.com/Huawei/H35-910-ENU-practice-exam-dumps.html