Latest Juniper JN0-452 First Attempt, Exam real Dumps Updated [Oct-2025]
Get the superior quality JN0-452 Dumps Questions from iPassleader. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION # 85
RF templates are assigned to which Mist configuration object?
- A. sites
- B. config templates
- C. site groups
- D. WLANs
Answer: B
NEW QUESTION # 86
You are asked to set up occupancy analytics for an office that has an existing Mist AP.
Which three types of devices are counted by default? (Choose three.)
- A. Zigbee clients
- B. Wi-Fi clients
- C. BLE assets
- D. mobile app clients
- E. cellular clients
Answer: B,C,D
NEW QUESTION # 87
An administrator is configuring a WPA3-Personal WLAN and wants to ensure the highest level of security against password guessing attacks.
Which underlying authentication mechanism is mandatory for WPA3-Personal and provides this protection?
- A. Opportunistic Key Caching (OKC)
- B. Extensible Authentication Protocol (EAP)
- C. Simultaneous Authentication of Equals (SAE)
- D. Temporal Key Integrity Protocol (TKIP)
Answer: C
NEW QUESTION # 88
An administrator is configuring a WLAN for corporate users and wants to ensure that traffic is tunneled to a central point in the data center for inspection and policy enforcement. Which architectural component is required to achieve this?
- A. Premium Analytics subscription
- B. A dedicated Juniper EX Series switch
- C. Marvis for Wireless license
- D. Juniper Mist Edge
Answer: D
NEW QUESTION # 89
An administrator is configuring a WLAN for IoT devices that require a simple, shared password.
They also want to prevent these low-trust devices from communicating with each other to limit the potential impact of a compromised device.
Which WLAN feature should be enabled to prevent direct communication between clients on the same WLAN?
- A. Band Steering
- B. Geofencing
- C. Client Isolation
- D. AirWatch Integration
Answer: C
NEW QUESTION # 90
What information would be streamed through webhooks? (Choose two.)
- A. SLE metrics of clients
- B. location coordinates of RFID tags
- C. audit logs
- D. alerts
Answer: B,C
Explanation:
Reference: https://www.mist.com/documentation/webhooks/
NEW QUESTION # 91
You have received a Marvis Actions Missing VLAN notification.
In this scenario, where is the problem?
- A. An access point is missing the VLAN.
- B. The gateway is missing the VLAN.
- C. A client is missing the VLAN.
- D. A switch is missing the VLAN.
Answer: D
Explanation:
Reference: https://www.mist.com/documentation/what-is-marvis-actions/
NEW QUESTION # 92
What are two functions of Mist Radio Resource Management (RRM)? (Choose two.)
- A. WLAN scheduling
- B. channel assignment
- C. Ethernet configurations
- D. transmit power control
Answer: B,D
NEW QUESTION # 93
Which two statements are correct about channel bonding? (Choose two.)
- A. Bonding two channels together doubles the available bandwidth.
- B. Bonding two channels together doubles the required device resources.
- C. Bonding two channels together doubles the number of available channels.
- D. Bonding two channels together doubles the noise floor.
Answer: A,D
Explanation:
Reference: https://www.makeuseof.com/tag/internet-speed-channel-bonding/
NEW QUESTION # 94
What is the impact of adding more SSIDs to a radio?
- A. channel overlap
- B. less BSSIDs reserved for a mesh network
- C. less secure
- D. beacon overhead
Answer: A
NEW QUESTION # 95
When setting up a new Mist organization, what is the recommended first step for structuring your sites and configurations?
- A. Configure Device Profiles for all AP models.
- B. Create a master Configuration Template with all standard WLANs and policies.
- C. Create the site structure (e.g., regions, cities, buildings).
- D. Claim all APs into the inventory.
Answer: C
NEW QUESTION # 96
The "Capacity" SLE is showing a poor health score.
Which of these is a likely cause?
- A. A client is too far away from the AP.
- B. The RADIUS server is slow to respond.
- C. The AP has a faulty cable connection to the switch.
- D. A large number of clients are connected to a single AP, and the RF channel is overutilized.
Answer: D
NEW QUESTION # 97
A hospital is using the Asset Visibility feature to track wheelchairs. They notice that the location of a specific wheelchair is not updating.
Which of the following is the most likely cause?
- A. The hospital's floorplan has not been scaled correctly.
- B. The Marvis subscription has expired.
- C. The WLAN is configured for WPA3.
- D. The wheelchair's BLE tag has a dead battery.
Answer: D
NEW QUESTION # 98
Which Wireless Assurance SLE provides information on Opportunistic Key Caching (OKC)?
- A. Roaming
- B. Coverage
- C. Time to Connect
- D. Capacity
Answer: A
Explanation:
Reference: https://www.mist.com/documentation/service-level-expectations-sle/
NEW QUESTION # 99
The Marvis Actions dashboard displays a "Health Check Failed" action for a specific access point.
What does this indicate? (Select all that apply.)
- A. The AP is running a firmware version that is different from other APs of the same model at the site.
- B. The AP is experiencing excessive RF interference.
- C. The AP has lost power.
- D. The AP has detected a Layer 2 loop on its wired port.
- E. The AP's hardware is potentially faulty (e.g., high CPU, memory issues, or self-detected hardware errors).
Answer: E
NEW QUESTION # 100
A user with a PSK calls you and says, "The Wi-Fi worked for a week and now it does not work." There have not been any recent configuration changes to the network. You suspect that a time-based setting has reset the key.
In this scenario, where would you begin troubleshooting?
- A. Site-level Pre-Shared Keys
- B. RADIUS Pre-Shared Keys
- C. WLAN-level Pre-Shared Keys
- D. Organization-level Pre-Shared Keys
Answer: C
NEW QUESTION # 101
A WxLAN policy has the following rules in order:
1. User: 'Guest-Users' -> Resources: 'All Resources' -> Action: 'Deny'
2. User: 'All Users' -> Resources: 'Public-Internet' -> Action: 'Allow'
3. User: 'All Users' -> Resources: 'All Resources' -> Action: 'Deny'
A user authenticates and is assigned the 'Guest-Users' role.
What access will this user have?
- A. The user will be able to access the Public Internet only.
- B. The user's access will be determined by a captive portal configuration.
- C. The user will be able to access all resources.
- D. The user will not be able to access any resources.
Answer: D
NEW QUESTION # 102
An administrator needs to configure a redundant and load-balanced tunneled wireless solution for a large campus that spans multiple buildings. The design requires that APs in one building (`Site- A`) prefer to tunnel to a Mist Edge in that same building, while APs in another building (`Site-B`) prefer to tunnel to a different Mist Edge in their building. However, if an Edge in one building fails, APs should be able to fail over to the Edge in the other building.
How should this be designed using the Mist architecture? (Select all that apply.)
- A. Configure two Mist Tunnels. Tunnel-A will have Site-A-Cluster as primary and Site-B-Cluster as secondary. Tunnel-B will have the reverse.
- B. Place all Mist Edge appliances into a single organization-level cluster.
- C. Create a Device Profile for Site-A APs that applies Tunnel-A.
- D. Create one Mist Cluster for Site-A's Edge and a separate Mist Cluster for Site-B's Edge.
- E. Use anchor tunneling between the two Mist Edge appliances.
- F. Create a Device Profile for Site-B APs that applies Tunnel-B.
Answer: A,C,D,F
NEW QUESTION # 103
......
Juniper Practice Test Engine with JN0-452 Questions: https://drive.google.com/open?id=1b4FStKu3uHBfqq2i1bjaH8KIhy5OWvOj
Guaranteed Success with Valid Juniper JN0-452 Dumps: https://www.ipassleader.com/Juniper/JN0-452-practice-exam-dumps.html