300-425 Practice Cisco Verified Answers - Pass Your Exams For Sure! [2023]
Valid Way To Pass CCNP Enterprise's 300-425 Exam
Topics of Cisco 300-425 Exam
To pass the Cisco 300-425 exam, the professionals must possess the necessary knowledge and skills, which help them cover all the questions presented in the overall content. The subject areas that will be measured in the delivery of this test include site surveys, wireless and wired infrastructure, WLAN high availability, and mobility. Let’s have a closer look at these topics and find out their objectives.
NEW QUESTION # 38
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
- B. Deploy environmentally friendly cabling components to blend into the environment.
- C. Paint the access point to cover the LED from being noticeable.
- D. Use enclosures to hide the wireless infrastructure in the surrounding environment.
Answer: B
Explanation:
NEW QUESTION # 39
A network engineer is working on a predictive WLAN design. The new wireless network must support access to internet, email, voice, and the inventory database To successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?
- A. signal strength of -70 dBm. 30-dB SNR. and maximum 10 percent packet loss
- B. signal strength of -67 dBm. 25-dB SNR. and maximum 1 percent packet loss
- C. signal strength of 67 dBm. 20-dB SNR and maximum 1 percent packet loss
- D. signal strength of -67 dBm. 20-dB SNR. and maximum 5 percent packet loss
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html
NEW QUESTION # 40
An enterprise is using the wireless network as the main network connection for corporate users and guests. To wireless network availability. Two Standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but faits. Which protocol needs to be allowed between the networks that the controllers are installed?
- A. IP Protocol 87
- B. IP Protocol 97
- C. IP Protocol 67
- D. IP Protocol 77
Answer: B
Explanation:
NEW QUESTION # 41
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
- A. rping
- B. ping
- C. mping
- D. eping
Answer: B
Explanation:
NEW QUESTION # 42
How should the concept of mobility domains and mobility groups be explained to a customer?
- A. WLCs do not need to be in the same mobility domain to communicate with each other Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
- B. if WLCs are in same mobility domain, they communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
- C. A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLCs are in the same mobility domain.
- D. If WLCs are in the same mobility domain, they communicate with each other but. if an anchor WLC present, it must: be in the same mobility domain for communication to be possible.
Answer: B
NEW QUESTION # 43
An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods allow access to the standby unit? (Choose two.)
- A. SSH to the redundancy management interface of the primary WLC
- B. via the console connection
- C. SSH to the management interface of the primary WLC
- D. SSH to the virtual interface of the secondary WLC
- E. SSH to the service port interface
Answer: B,E
NEW QUESTION # 44
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. no support for 802.11r
- B. higher data rates than laptops
- C. no support for 802.11ac
- D. lower data rates than laptops
- E. fewer antennas than laptops
Answer: D,E
Explanation:
NEW QUESTION # 45
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
So, each AP will have 25 clients. Minimum 4 APs are sufficient.
NEW QUESTION # 46
Which technology provides a multichassis IP connection between VSS-enabled switches and downstream devices?
- A. LAG
- B. PAgP
- C. MEC
- D. ICCP
- E. LACP
- F. BFD
Answer: C
NEW QUESTION # 47
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
- B. Deploy environmentally friendly cabling components to blend into the environment.
- C. Paint the access point to cover the LED from being noticeable.
- D. Use enclosures to hide the wireless infrastructure in the surrounding environment.
Answer: B
Explanation:
NEW QUESTION # 48
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
- A. CCKM
- B. SKC
- C. OKC
- D. 802.11r
Answer: C
Explanation:
NEW QUESTION # 49
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. antenna gain
- B. aesthetics
- C. transmit power considerations
- D. power supply considerations
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551
NEW QUESTION # 50
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
- A. in the aisle
- B. under the seat
- C. above the stage
- D. under the stage
Answer: B
Explanation:
NEW QUESTION # 51
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which two elements have a negative effect on the wireless users? (Choose two.)
- A. client authorization
- B. client authentication
- C. absorption
- D. access point height
- E. wireless channels
Answer: C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#
NEW QUESTION # 52
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
- A. in the aisle
- B. under the seat
- C. above the stage
- D. under the stage
Answer: B
Explanation:
NEW QUESTION # 53
Two cisco 5520 wireless LAN controllers are managing all access points throughout the network. The WLCs are in different locations to provide geographical redundancy a mobility group has been configured on both WLCs and has a UP status on both controllers. The Aps in location A are statically configured to use controller A as the primary and controller B as the secondary. If the WLC in location A goes offline. The Aps successfully join the WLC in location, but they do not fail over to their primary configured controller. Which configuration task fixes the issue?
- A. Configure the WLC in location A as primary using the CAPWAP AP Controller IP Address command on all the location A Access points.
- B. Enable AP fallback globally on the WLC
- C. Use DHCP Option 43 and specify WLC in location A as primary.
- D. Change the AP Failover Priority to critical.
Answer: B
NEW QUESTION # 54
A wireless engineer is designing a wireless network to support real-time applications over wireless. Which IEEE protocol must the engineer enables on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11i
- B. 802.11k
- C. 802.11w
- D. 802.11r
Answer: D
Explanation:
NEW QUESTION # 55
Why is 802.11a connectivity reduced in an X-ray room?
- A. X -rays within these rooms cause multipath issues.
- B. X-rays create significant non-Wi-Fi interference on the 802.11a band.
- C. X-rays impact the 802,11a UNll-2 channels that cause access points to dynamically change channels.
- D. X-ray rooms exhibit increased signal attenuation.
Answer: B
Explanation:
portable X-ray machines, sending high-resolution images, sometimes in real time, echography machines, and electrocardiography [ECG] machines). These devices may also use the same spectrum as Wi-Fi but with other protocols and, therefore, become sources of interference for your system.
NEW QUESTION # 56
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)
- A. PoE battery
- B. spirit level
- C. goggles
- D. access point
- E. tall tripod
- F. ladder
Answer: A,D,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/81/design/guide/b_mesh_81/Site_Preparation_
NEW QUESTION # 57
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?
- A. overlapping -67 dBm coverage from two access points
- B. continuous -67 dBm coverage from one access point
- C. continuous -72 dBm coverage from one access point
- D. overlapping -72 dBm coverage from two access points
Answer: B
Explanation:
Explanation
So -67dBm covers both Data & Voice with a single AP
NEW QUESTION # 58
......
Cisco 300-425 Pre-Exam Practice Tests | iPassleader: https://www.ipassleader.com/Cisco/300-425-practice-exam-dumps.html
300-425 practice test questions, answers, explanations: https://drive.google.com/open?id=1tl9wtmqMbHP1l0CwBkjO0_qWHtoEeNiE