[UPDATED May-2025] Best Value Available Preparation Guide for EX200 Exam
1 Full EX200 Practice Test and 157 Unique Questions, Get it Now!
The RHCSA exam is a popular certification among IT professionals, as it provides a solid foundation for those seeking to advance their careers in system administration. Red Hat Certified System Administrator - RHCSA certification is recognized by many organizations around the world and is highly valued by employers. EX200 exam is also a prerequisite for other advanced Red Hat certifications, such as the Red Hat Certified Engineer (RHCE) and the Red Hat Certified Architect (RHCA).
NEW QUESTION # 50
Part 1 (on Node1 Server)
Task 12 [Accessing Network-Attached Storage]
Configure autofs to automount the home directories of user remoteuserX. Note the following:
utility.domain15.example.com(172.25.15.9), NFS-exports /netdir to your system, where user is remoteuserX where X is your domain number remoteuserX home directory is utility.domain15.example.com:/netdir/remoteuserX remoteuserX home directory should be auto mounted locally at /netdir as /netdir/remoteuserX Home directories must be writable by their users while you are able to login as any of the remoteuserX only home directory that is accessible from your system
Answer:
Explanation:
* *
[root@host ~]#systemctl enable sssd.service
[root@host ~]#systemctl start sssg.service
[root@host ~]#getent passwd remoteuser15
[root@host ~]#yum install autofs
[root@host ~]#vim /etc/auto.master.d/home9.autofs
/netdir/remoteuser15 /etc/auto.home9
[root@host ~]#vim /etc/auto.home9
remoteuser15 -rw,sync utility.network15.example.com:/netdir/remoteuser15/&
[root@host ~]#systemctl enable autofs
[root@host ~]#systemctl restart autofs
[root@host ~]#su - remoteuser15
NEW QUESTION # 51
CORRECT TEXT
Download ftp://192.168.0.254/pub/boot.iso to /root, and mounted automatically under /media/cdrom and which take effect automatically at boot-start.
Answer:
Explanation:
# cd /root; wget ftp://192.168.0.254/pub/boot.iso
# mkdir -p /media/cdrom
# vim /etc/fstab
/root/boot.iso /media/cdrom iso9660 defaults,loop 0 0
# mount -a
mount [-t vfstype] [-o options] device dir
NEW QUESTION # 52
Configure Network Settings
Configure node1 with the following network settings:
Hostname: node1.domain250.example.com
IP address: 172.25.250.100
Subnet mask: 255.255.255.0
Gateway: 172.25.250.254
Answer:
Explanation:
# Connect to servera via console for IP modification, then check using the ip addr command.
# After confirming no issues, SSH to servera for hostname modification. This way, you can copy the hostname to avoid typos.
[root@clear ~] nmcli con show
[root@clear ~] nmcli con mod 'network configuration name' ipv4.method manual ipv4.addresses 172.25.0.25/24 ipv4.gateway 172.25.0.254 ipv4.dns 172.25.0.254 autoconnect yes
[root@clear ~] nmcli con up 'network configuration name'
[root@clear ~] ip a
[root@clear ~] ssh [email protected]
[root@clear ~] hostnamectl set-hostname red.lab0.example.com
# Verification
[root@node1 ~] ip a //Check if the IP is correct
[root@node1 ~] hostname //Check if the hostname is correct
NEW QUESTION # 53
SELinux must be running in the Enforcing mode.
Answer:
Explanation:
getenforce // Check the current mode of SELinux // SELinux runs in enforcing mode // Check getenforce 1 getenforce vim /etc/selinux/config selinux=enforcing // To temporarily enable SELinux wg sestatus
NEW QUESTION # 54
Create a catalog under /home named admins. Its respective group is requested to be the admin group.
The group users could read and write, while other users are not allowed to access it. The files created by users from the same group should also be the admin group.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NEW QUESTION # 55
Find the rows that contain abcde from file /etc/testfile, and write it to the file/tmp/testfile, and the sequence is requested as the same as /etc/testfile.
Answer:
Explanation:
# cat /etc/testfile | while read line;
do
echo $line | grep abcde | tee -a /tmp/testfile
done
OR
grep `abcde' /etc/testfile > /tmp/testfile
NEW QUESTION # 56
Configure the verification mode of your host account and the password as LDAP. And it can login successfully through ldapuser40. The password is set as "password". And the certificate can be downloaded from http://ip/dir/ldap.crt. After the user logs on the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP) OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION # 57
Add a new logical partition having size 100MB and create the data which will be the mount point for the new partition.
Answer:
Explanation:
see explanation below.
Explanation
1. Use fdisk /dev/hda-> To create new partition.
2. Type n ->For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Keys
5. Type the size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
1. mke2fs -j /dev/hda? ->To create ext3 filesystem.
2. vi /etc/fstab
3. Write:
/dev/hda? /data ext3 defaults 0 0
4. Verify by mounting on current sessions also:
mount /dev/hda? /data
NEW QUESTION # 58
Configure the verification mode of your host account and the password as LDAP. And it can ldapuser40.
The password is set as "password". And the certificate login successfully through can be downloaded from http://ip/dir/ldap.crt. After the user logs on , the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP) OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION # 59
SIMULATION
Create the following users, groups, and group memberships:
A group named adminuser.
A user natasha who belongs to adminuser as a secondary group A user harry who also belongs to adminuser as a secondary group.
A user sarah who does not have access to an interactive shell on the system, and who is not a member of adminuser, natasha, harry, and sarah should all have the password of redhat.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
groupadd sysmgrs
useradd -G sysmgrs Natasha
We can verify the newly created user by cat /etc/passwd)
# useradd -G sysmgrs harry
# useradd -s /sbin/nologin sarrh
# passwd Natasha
# passwd harry
# passwd sarrah
NEW QUESTION # 60
Make on /archive directory that only the user owner and group owner member can fully access.
Answer:
Explanation:
chmod 770 /archive
Verify using : ls -ld /archive Preview should be like:
drwxrwx--- 2 root sysuser 4096 Mar 16 18:08 /archive
To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysuser) can fully access the directory so: chmod 770 /archive
NEW QUESTION # 61
Set cronjob for user natasha to do /bin/echo hiya at 14:23.
Answer:
Explanation:
see explanation below.
Explanation
# crontab -e -u natasha
23 14 * * * /bin/echo hiya
wq!
NEW QUESTION # 62
Configure autofs
Configure autofs to automatically mount the home directory of a remote user as described below:
- materials.example.com (172.25.254.254) exports /rhome via NFS to your system. This filesystem contains a pre-configured home directory for the user remoteuser1.
- The home directory of remoteuser1 is materials.example.com:/rhome/remoteuser1.
- The home directory of remoteuser1 should be automatically mounted locally at /rhome/remoteuser1.
- The home directory must be writable by the user.
- The password for remoteuser1 is "flectrag".
Answer:
Explanation:
# Preparations (not required for the exam)
# Go back to foundation0, remote into classroom, create the remoteuser1 user and directory.
# This step is necessary to avoid issues with autofs mounting during testing.
[kiosk@foundation0 ~]$ ssh root@classroom 'useradd -u 1010 remoteuser1 && mkdir -p /rhome/remoteuser1 && chown remoteuser1: /rhome/remoteuser1'
# Install nfs-utils and autofs
[root@node1 ~]# yum -y install nfs-utils autofs
[root@node1 ~]# vim /etc/auto.master
/rhome /etc/auto.rhome
[root@node1 ~]# vim /etc/auto.rhome
remoteuser1 -rw materials.example.com:/rhome/remoteuser1
[root@node1 ~]# systemctl enable --now autofs
# Verification
[root@node1 ~]# ll /rhome/
[root@node1 ~]# ssh remoteuser1@localhost
remoteuser1@localhost\'s password: `flectrag`
$ pwd
/rhome/remoteuser1
$ touch my.file
$ mount | grep rhome
...
materials.example.com:/rhome/remoteuser1 on /rhome/remoteuser1 type nfs4 (`rw`,relatime,vers=4.2,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=172.25.250.100,local_lock=none,addr=172.25.254.254)
NEW QUESTION # 63
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.
Answer:
Explanation:
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G t
8 I
82
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)
NEW QUESTION # 64
Configure a task: plan to run echo hello command at 14:23 every day.
Answer:
Explanation:
# which echo
# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)
NEW QUESTION # 65
Update the kernel from ftp://instructor.example.com/pub/updates.
According the following requirements:
* The updated kernel must exist as default kernel after rebooting the system.
* The original kernel still exists and is available in the system.
Answer:
Explanation:
see explanation below.
Explanation
rpm -ivh kernel-firm...
rpm -ivh kernel...
NEW QUESTION # 66
......
The EX200 exam is a two and a half hour, hands-on, performance-based test that focuses on real-world tasks and scenarios that system administrators face in their daily work routine. EX200 exam is conducted in a controlled environment where candidates are provided with a virtual machine to perform various tasks related to system administration. These tasks include configuring and managing network services, managing storage devices, configuring security policies, and troubleshooting system issues.
Get Instant Access to EX200 Practice Exam Questions: https://www.ipassleader.com/RedHat/EX200-practice-exam-dumps.html
The Best EX200 Exam Study Material Premium Files and Preparation Tool: https://drive.google.com/open?id=1XVRBmXBW9eUTPwekpdTXgKNSTWHLUCAw