View FCSS_ADA_AR-6.7 Exam Question Dumps With Latest Demo [Jun 30, 2026]
Free FCSS_ADA_AR-6.7 Test Questions Real Practice Test Questions
Fortinet FCSS_ADA_AR-6.7 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 12
If an unusual spike in network traffic is detected, which tool would be most effective in automating a response action?
- A. FortiSOAR?
- B. FortiAntivirus?
- C. FortiStorage?
- D. FortiUser?
Answer: A
NEW QUESTION # 13
Refer to the exhibit.
An administrator runs an analytic search for all FortiGate SSL VPN logon failures. The results are grouped by source IP, reporting IP, and user. The administrator wants to restrict the results to only those rows where the COUNT >=3.
Which user would meet that condition?
- A. Sarah
- B. Jan
- C. Tom
- D. Admin
Answer: C
NEW QUESTION # 14
Refer to the exhibit.
Within what time window is the incident auto cleared?
- A. 1800 seconds
- B. Null
- C. 1 day
- D. 30 minutes
Answer: B
Explanation:
In the exhibit, the "Clear If" condition does not specify a condition for auto-clearing the incident. If an incident does not have a specific clear condition, it remains active until manually resolved or cleared by another process.
NEW QUESTION # 15
How do customers connect to a shared multi-tenant instance on FortiSOAR?
- A. The MSSP must provide secure network connectivity between the FortiSOAR manager node and the customer devices.
- B. The MSSP must install an agent node on the customer's network to connect to the customer's shared multi-tenant instance.
- C. The customer must install a tenant node to connect to the MSSP shared multi-tenant instance.
- D. The MSSP must install a Secure Message Exchange node to connect to the customer's shared multi- tenant instance.
Answer: A
NEW QUESTION # 16
What happens to events that the collector receives when there is a WAN link failure between the collector and the supervisor?
- A. Events are buffered up to 10.000 logs.
- B. Events are buffered up to 10 MB before compression.
- C. Events are buffered up to 1 GB after compression.
- D. Events are buffered for up to 24 hours.
Answer: C
Explanation:
When a WAN link failure occurs between the collector and the supervisor in FortiSIEM:
# The collector does not discard events; instead, it buffers them until the connection is restored.
# The buffering limit is up to 1 GB after compression to optimize storage and prevent data loss.
# Once the WAN link is restored, buffered events are sent to the supervisor for processing.
NEW QUESTION # 17
Refer to the exhibit.
An administrator wants to remediate the incident from FortiSIEM shown in the exhibit.
What option is available to the administrator?
- A. Quarantine IP FortiClient
- B. Run the block domain Windows DNS
- C. Run the block IP FortiOS 5.4
- D. Run the block MAC FortiOS
Answer: C
Explanation:
The incident shown in the exhibit indicates that a firewall detected malware but could not remediate it. The firewall identified the EICAR_TEST_FILE virus and logged the source IP (10.0.3.10) as the origin of the threat.
To remediate this, the administrator should take action at the network level, specifically using FortiOS to block the source IP address. The option "Run the block IP FortiOS 5.4" provides the ability to block traffic from the infected IP at the firewall level, effectively preventing further threats from that source.
NEW QUESTION # 18
Refer to the exhibit.
Which devices will be added to the CMDB and mapped to Customer E?
- A. 10.50.0.150
- B. 10.60.0.1
- C. 10.50.0.1
- D. 10.50.0.149
Answer: C,D
Explanation:
From the exhibit, we can determine the IP range that will be added to the CMDB and mapped to Customer E.
*The included IP range is 10.50.0.1 - 10.50.0.50.
*This means any device within this range (10.50.0.1 to 10.50.0.50) will be added to the CMDB.
10.50.0.1 → Falls within the included range (10.50.0.1 - 10.50.0.50) → Added to CMDB.
10.50.0.149 → Falls within the 10.50.0.1 - 10.50.0.50 range → Added to CMDB.
NEW QUESTION # 19
How can FortiSIEM baseline and profile reports assist in enhancing security?
- A. By providing insights into potential areas of vulnerability?
- B. By generating a list of user passwords for verification purposes?
- C. By detailing the software version details of network devices?
- D. By highlighting deviations from established norms?
Answer: A,D
NEW QUESTION # 20
Refer to the exhibit.
Which statement about the rule filters events shown in the exhibit is true?
- A. The rule filters events with an event type that belong to the Domain Account Locked CMDB group and a user that belongs to the Domain Controller applications group.
- B. The rule filters events with an event type that belong to the Domain Account Locked CMDB group or a reporting IP that belong to the Domain Controller applications group.
- C. The rule filters events with an event type that belong to the Domain Account Locked CMDB group and a reporting IP that belong to the Domain Controller applications group.
- D. The rule filters events with an event type that equals Domain Account Locked and a reporting IP that equals Domain Controller applications.
Answer: C
Explanation:
From theFilterssection in the exhibit, we see:
1.Event Type IN EventTypes: Domain Account Locked
This means the rule will match events where the event type is classified under theDomain Account Lockedcategory.*
2.Reporting IP IN Applications: Domain Controller
This means the rule is filtering for events where the reporting IP is classified under theDomain Controller applications group.*
3.Logical Operator: AND
The filters are combined usingAND, meaning both conditions must be met for an event to match.
Since both conditions must be true, the rule is effectively filtering events where:
# Theevent typebelongs to theDomain Account Locked CMDB group
# Thereporting IPbelongs to theDomain Controller applications group
NEW QUESTION # 21
How can you empower SOC by deploying FortiSOAR? (Choose three.)
- A. Aggregate logs from distributed systems
- B. Baseline user and traffic behavior
- C. Address analyst skills gap
- D. Reduce human error
- E. Collaborative knowledge sharing
Answer: C,D,E
Explanation:
Collaborative knowledge sharing: FortiSOAR enables security teams to share knowledge, automate workflows, and improve incident response efficiency by centralizing intelligence and standardizing processes.
Addressing analyst skills gap: By automating repetitive tasks and providing guided response playbooks, FortiSOAR helps SOC teams compensate for skill shortages and improve operational effectiveness.
Reducing human error: Automation and predefined workflows minimize manual interventions, reducing the likelihood of errors in incident detection, response, and remediation.
NEW QUESTION # 22
Refer to the exhibit.
Why is the windows device still in the CMDB, even though the administrator uninstalled the windows agent?
- A. The device was not installed properly
- B. The device must be deleted from backend of FortiSIEM
- C. The device must be deleted manually from the CMDB
- D. The device has performance jobs assigned
Answer: B
NEW QUESTION # 23
Which organization do agents belong to after registration? (Choose two.)
- A. The agents belong to the organization specified in the agent installation setup wizard for Windows platforms.
- B. The windows agents belong to the super organization.
- C. The Linux agents belong to the super local organization.
- D. The agents belong to the organization specified in the command line parameters for Linux platforms.
Answer: A,D
Explanation:
When registering agents in FortiSIEM, the organization to which they belong depends on how they are installed:
*Windows Agents
*During installation, the setup wizard prompts the user to specify the organization.
*This ensures the agent is correctly assigned to the organization defined during setup.
*Linux Agents
*Installation on Linux requires command-line parameters, including the organization name.
*This means that the organization is explicitly defined during the installation process.
NEW QUESTION # 24
Refer to the exhibit.
An administrator wants to remediate the incident from FortiSIEM shown in the exhibit.
What option is available to the administrator?
- A. Run the block IP FortiOS 5.4
- B. Quarantine IP FortiClient
- C. Run the block domain Windows DNS
- D. Run the block MAC FortiOS
Answer: C
NEW QUESTION # 25
Refer to the exhibit.
Why was this incident auto cleared?
- A. Within five minutes the packet loss percentage dropped to a level where the reporting IP is the same as the host IP
- B. Within five minutes, the packet loss percentage dropped to a level where the reporting IP is same as the source IP
- C. The original rule did not trigger within five minutes
- D. Within five minutes, the packet loss percentage dropped to a level where the host IP of the original rule matches the host IP of the clear condition pattern
Answer: D
Explanation:
From the "Clear If" condition in the exhibit:
*WITHIN 5 minutes, the system checks if the pattern AllPingLossSrv_CLEAR occurs.
*The Host IP of the clear condition must match the Host IP of the original rule (Clear_Condition.Host IP = Original_Rule.Host IP).
*If this condition is met, the system automatically clears the incident because it indicates that network connectivity has been restored (packet loss has dropped).
Thus, the incident was auto-cleared because the system detected that the issue was resolved within the defined 5-minute window, meeting the conditions for auto-clearance.
NEW QUESTION # 26
FortiSIEM provides all rules with the ability to automatically change an active incident status to auto-cleared, based on an extra set of defined criteria.
Why would you configure FortiSIEM to automatically change an active incident status to auto-cleared?
- A. Because too many active incidents can spike the resource usaqe on FortiSIEM.
- B. Because you need a way to reduce a backlog of incident responses.
- C. Because availability or performance-related problems may trigger a threshold temporarily.
- D. Because some security-related incidents occur on a temporary basis.
Answer: C
Explanation:
In FortiSIEM, some incidents may be triggered due to temporary threshold breaches, especially in availability or performance-related monitoring. These temporary anomalies do not necessarily indicate a persistent issue or security threat.
By automatically clearing such incidents, FortiSIEM prevents unnecessary manual intervention and reduces noise in incident management.
NEW QUESTION # 27
Refer to the exhibit.
Which workers are assigned tasks for the query ID 13127? (Choose two.)
- A. Worker3 has two tasks for query ID 13127*.
- B. Worker1 has one task for query ID 13127*.
- C. Worker3 has four tasks for query ID 13127*.
- D. Worker2 has two tasks for query ID 13127*.
- E. Worker1 has no tasks for query ID 13127*.
Answer: A,E
Explanation:
The exhibit shows the directory listings for three different workers (worker1, worker2, and worker3) under the /querywkr/active/13127* path, which indicates active query tasks assigned to each worker.
1. Worker1 (worker1)
2. Worker2 (worker2)
3. Worker3 (worker3)
NEW QUESTION # 28
Refer to the exhibit.
Is the Windows agent delivering event logs correctly?
- A. Because the agent is unmanaged. the logs are dropped silently by the supervisor.
- B. The logs are buffered by the agent and will be sent once the status changes to managed.
- C. The agent is registered and it is sending logs correctly.
- D. The agent is not sending logs because it did not receive a monitoring template.
Answer: A
NEW QUESTION # 29
Refer to the exhibit.
Which three fields from the organization destination are required while registering a collector? (Choose three.)
- A. Admin User
- B. Agent Password
- C. Organization
- D. Account Number
- E. Admin Password
Answer: A,C,E
Explanation:
The admin password is a mandatory field, as indicated in the exhibit ("Required" in red). It is needed for authentication and administrative access.
The organization name ("University") is necessary to associate the collector with the correct organization.
The Admin User (uniadmin) is a required field for defining the administrator of the collector.
NEW QUESTION # 30
In the context of incident remediation, how can FortiSOAR assist?
- A. By automating specific response actions based on pre-defined playbooks?
- B. By orchestrating actions across multiple security tools in the environment?
- C. By archiving older logs to save storage space?
- D. By providing a platform for team communication during an incident?
Answer: A,B,D
NEW QUESTION # 31
Refer to the exhibit.
Which workers are assigned tasks for the query ID13127? (Choose two.)
- A. Worker3 has two tasks for query ID 13127*.
- B. Worker1 has one task for query ID 13127*.
- C. Worker3 has four tasks for query ID 13127*.
- D. Worker2 has two tasks for query ID 13127*.
- E. Worker1 has no tasks for query ID 13127*.
Answer: A,E
Explanation:
The exhibit shows the directory listings forthree different workers(worker1,worker2, andworker3) under the
/querywkr/active/13127*path, which indicatesactive query tasksassigned to each worker.
1.Worker1 (worker1)
The output doesnotshow any subdirectories or task files (13127t0,13127t1, etc.), meaningWorker1 is not assigned any tasks.*
2.Worker2 (worker2)
The output showsone task (13127t1)under/querywkr/active/13127*.
The workerhas only one assigned task, not two, so optionsC and D are incorrect.
3.Worker3 (worker3)
The output showstwo tasks (13127t0and13127t1), indicating that Worker3 is processingtwo tasksfor query ID
13127.*
NEW QUESTION # 32
How do customers connect to a shared multi-tenant instance on FortiSOAR?
- A. The MSSP must provide secure network connectivity between the FortiSOAR manager node and the customer devices.
- B. The MSSP must install an agent node on the customer's network to connect to the customer's shared multi-tenant instance.
- C. The customer must install a tenant node to connect to the MSSP shared multi-tenant instance.
- D. The MSSP must install a Secure Message Exchange node to connect to the customer's shared multi- tenant instance.
Answer: A
Explanation:
In a multi-tenant FortiSOAR deployment, a Managed Security Service Provider (MSSP) hosts a shared FortiSOAR instance that serves multiple customers. Each customer operates as a separate tenant within the instance, ensuring data isolation and security.
FortiSOAR uses secure network connectivity (VPNs, direct connections, or secure tunnels) between the MSSP's FortiSOAR manager node and the customer's devices.
The customer does not need to install additional software or tenant nodes; instead, the MSSP manages multi- tenancy at the platform level.
NEW QUESTION # 33
Which of the following is crucial when defining and deploying collectors and agents in a SOC environment?
- A. Coordinating with the software vendor for updates.
- B. Managing software licenses effectively.
- C. Ensuring high-speed internet connectivity.
- D. Ensuring compatibility with the target system.
Answer: D
NEW QUESTION # 34
When constructing FortiSIEM baseline rules, what would be an effective approach?
- A. Relying solely on machine learning without human input?
- B. Copying rules from other organizations for best practices?
- C. Designing rules based on observed and expected network behaviors?
- D. Including as many rules as possible for diversity?
Answer: C
NEW QUESTION # 35
......
View All FCSS_ADA_AR-6.7 Actual Free Exam Questions Updated: https://www.ipassleader.com/Fortinet/FCSS_ADA_AR-6.7-practice-exam-dumps.html
FCSS_ADA_AR-6.7 Dumps Updated Jun 30, 2026 WIith 61 Questions: https://drive.google.com/open?id=1oaYOhRWfJPSg221f82H-iUlYb-R5C6tX