iPassleader PCEP-30-02 Exam Questions | Real PCEP-30-02 Practice Dumps
Verified PCEP-30-02 Exam Dumps Q&As - Provide PCEP-30-02 with Correct Answers
NEW QUESTION # 17
Insert the code boxes in the correct positions in order to build a line of code which asks the user for an integer value and assigns it to the depth variable.
(Note: some code boxes will not be used.)
Answer:
Explanation:
Explanation
One possible way to insert the code boxes in the correct positions in order to build a line of code which asks the user for an integer value and assigns it to the depth variable is:
depth = int(input("Enter the immersion depth: "))
This line of code uses the input function to prompt the user for a string value, and then uses the int function to convert that string value into an integer number. The result is then assigned to the variable depth.
You can find more information about the input and int functions in Python in the following references:
[Python input() Function]
[Python int() Function]
NEW QUESTION # 18
What happens when the user runs the following code?
- A. The program outputs five asterisks ( ***** ) to the screen.
- B. The program outputs one asterisk ( * ) to the screen.
- C. The program enters an infinite loop.
- D. The program outputs three asterisks ( *** )to the screen.
Answer: C
Explanation:
Explanation
The code snippet that you have sent is a while loop with an if statement and a print statement inside it. The code is as follows:
while True: if counter < 0: print("") else: print("**")
The code starts with entering a while loop that repeats indefinitely, because the condition "True" is always true. Inside the loop, the code checks if the value of "counter" is less than 0. If yes, it prints a single asterisk () to the screen. If no, it prints three asterisks (**) to the screen. However, the code does not change the value of
"counter" inside the loop, so the same condition is checked over and over again. The loop never ends, and the code enters an infinite loop.
The program outputs either one asterisk () or three asterisks (**) to the screen repeatedly, depending on the initial value of "counter". Therefore, the correct answer is D. The program enters an infinite loop.
NEW QUESTION # 19
Assuming that the following assignment has been successfully executed:
My_list - [1, 1, 2, 3]
Select the expressions which will not raise any exception.
(Select two expressions.)
- A. my_List- [0:1]
- B. my list [6]
- C. my_list|my_Li1st | 3| I
- D. my_list[-10]
Answer: A,C
Explanation:
Explanation
The code snippet that you have sent is assigning a list of four numbers to a variable called "my_list". The code is as follows:
my_list = [1, 1, 2, 3]
The code creates a list object that contains the elements 1, 1, 2, and 3, and assigns it to the variable "my_list".
The list can be accessed by using the variable name or by using the index of the elements. The index starts from 0 for the first element and goes up to the length of the list minus one for the last element. The index can also be negative, in which case it counts from the end of the list. For example, my_list[0] returns 1, and my_list[-1] returns 3.
The code also allows some operations on the list, such as slicing, concatenation, repetition, and membership.
Slicing is used to get a sublist of the original list by specifying the start and end index. For example, my_list[1:3] returns [1, 2]. Concatenation is used to join two lists together by using the + operator. For example, my_list + [4, 5] returns [1, 1, 2, 3, 4, 5]. Repetition is used to create a new list by repeating the original list a number of times by using the * operator. For example, my_list * 2 returns [1, 1, 2, 3, 1, 1, 2, 3].
Membership is used to check if an element is present in the list by using the in operator. For example, 2 in my_list returns True, and 4 in my_list returns False.
The expressions that you have given are trying to access or manipulate the list in different ways. Some of them are valid, and some of them are invalid and will raise an exception. An exception is an error that occurs when the code cannot be executed properly. The expressions are as follows:
A). my_list[-10]: This expression is trying to access the element at the index -10 of the list. However, the list only has four elements, so the index -10 is out of range. This will raise an IndexError exception and output nothing.
B). my_list|my_Li1st | 3| I: This expression is trying to perform a bitwise OR operation on the list and some other operands. The bitwise OR operation is used to compare the binary representation of two numbers and return a new number that has a 1 in each bit position where either number has a 1. For example, 3 | 1 returns 3, because 3 in binary is 11 and 1 in binary is 01, and 11 | 01 is 11. However, the bitwise OR operation cannot be applied to a list, because a list is not a number. This will raise a TypeError exception and output nothing.
C). my list [6]: This expression is trying to access the element at the index 6 of the list. However, the list only has four elements, so the index 6 is out of range. This will raise an IndexError exception and output nothing.
D). my_List- [0:1]: This expression is trying to perform a subtraction operation on the list and a sublist. The subtraction operation is used to subtract one number from another and return the difference. For example, 3 - 1 returns 2. However, the subtraction operation cannot be applied to a list, because a list is not a number. This will raise a TypeError exception and output nothing.
Only two expressions will not raise any exception. They are:
B). my_list|my_Li1st | 3| I: This expression is not a valid Python code, but it is not an expression that tries to access or manipulate the list. It is just a string of characters that has no meaning. Therefore, it will not raise any exception, but it will also not output anything.
D). my_List- [0:1]: This expression is a valid Python code that uses the slicing operation to get a sublist of the list. The slicing operation does not raise any exception, even if the start or end index is out of range. It will just return an empty list or the closest possible sublist. For example, my_list[0:10] returns [1, 1, 2, 3], and my_list[10:20] returns []. The expression my_List- [0:1] returns the sublist of the list from the index 0 to the index 1, excluding the end index. Therefore, it returns [1]. This expression will not raise any exception, and it will output [1].
Therefore, the correct answers are B. my_list|my_Li1st | 3| I and D. my_List- [0:1].
NEW QUESTION # 20
Drag and drop the code boxes in order to build a program which prints Unavailable to the screen.
(Note: one code box will not be used.)
Answer:
Explanation:
NEW QUESTION # 21
What is the expected output of the following code?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
The code snippet that you have sent is using the count method to count the number of occurrences of a value in a list. The code is as follows:
my_list = [1, 2, 3, 4, 5] print(my_list.count(1))
The code starts with creating a list called "my_list" that contains the numbers 1, 2, 3, 4, and 5. Then, it uses the print function to display the result of calling the count method on the list with the argument 1. The count method is used to return the number of times a value appears in a list. For example, my_list.count(1) returns 1, because 1 appears once in the list.
The expected output of the code is 1, because the code prints the number of occurrences of 1 in the list.
Therefore, the correct answer is D. 1.
NEW QUESTION # 22
What is the expected result of the following code?
- A. 0
- B. The code will cause an unhandled
- C. 1
- D. 2
Answer: B
Explanation:
Explanation
The code snippet that you have sent is trying to use a list comprehension to create a new list from an existing list. The code is as follows:
my_list = [1, 2, 3, 4, 5] new_list = [x for x in my_list if x > 5]
The code starts with creating a list called "my_list" that contains the numbers 1, 2, 3, 4, and 5. Then, it tries to create a new list called "new_list" by using a list comprehension. A list comprehension is a concise way of creating a new list from an existing list by applying some expression or condition to each element. The syntax of a list comprehension is:
new_list = [expression for element in old_list if condition]
The expression is the value that will be added to the new list, which can be the same as the element or a modified version of it. The element is the variable that takes each value from the old list. The condition is an optional filter that determines which elements will be included in the new list. For example, the following list comprehension creates a new list that contains the squares of the even numbers from the old list:
old_list = [1, 2, 3, 4, 5, 6] new_list = [x ** 2 for x in old_list if x % 2 == 0] new_list = [4, 16, 36]The code that you have sent is trying to create a new list that contains the elements from the old list that are greater than 5. However, there is a problem with this code. The problem is that none of the elements in the old list are greater than 5, so the condition is always false. This means that the new list will be empty, and the expression will never be evaluated. However, the expression is not valid, because it uses the variable x without defining it. This will cause a NameError exception, which is an error that occurs when a variable name is not found in the current scope. The code does not handle the exception, and therefore it will terminate with an error message.
The expected result of the code is an unhandled exception, because the code tries to use an undefined variable in an expression that is never executed. Therefore, the correct answer is D. The code will cause an unhandled exception.
NEW QUESTION # 23
Assuming that the phonc_dir dictionary contains namemumber pairs, arrange the code boxes to create a valid line of code which retrieves Martin Eden's phone number, and assigns it to the number variable.
Answer:
Explanation:
Explanation
number = phone_dir["Martin Eden"]
This code uses the square brackets notation to access the value associated with the key "Martin Eden" in the phone_dir dictionary. The value is then assigned to the variable number. A dictionary is a data structure that stores key-value pairs, where each key is unique and can be used to retrieve its corresponding value. You can find more information about dictionaries in Python in the following references:
[Python Dictionaries - W3Schools]
[Python Dictionary (With Examples) - Programiz]
[5.5. Dictionaries - How to Think Like a Computer Scientist ...]
NEW QUESTION # 24
Arrange the code boxes in the correct positions to form a conditional instruction which guarantees that a certain statement is executed when the speed variable is less than 50.0.
Answer:
Explanation:
Explanation
One possible way to arrange the code boxes in the correct positions to form a conditional instruction which guarantees that a certain statement is executed when the speed variable is less than 50.0 is:
if speed < 50.0:
print("The speed is low.")
This code uses the if keyword to create a conditional statement that checks the value of the variable speed. If the value is less than 50.0, then the code will print "The speed is low." to the screen. The print function is used to display the output. The code is indented to show the block of code that belongs to the if condition.
You can find more information about the if statement and the print function in Python in the following references:
Python If ... Else
Python Print Function
NEW QUESTION # 25
What is the expected result of running the following code?
- A. The code prints 0
- B. The code prints 2
- C. The code raises an unhandled exception.
- D. The code prints 1 .
Answer: C
Explanation:
Explanation
The code snippet that you have sent is trying to use the index method to find the position of a value in a list.
The code is as follows:
the_list = [1, 2, 3, 4, 5] print(the_list.index(6))
The code starts with creating a list called "the_list" that contains the numbers 1, 2, 3, 4, and 5. Then, it tries to print the result of calling the index method on the list with the argument 6. The index method is used to return the first occurrence of a value in a list. For example, the_list.index(1) returns 0, because 1 is the first value in the list.
However, the code has a problem. The problem is that the value 6 is not present in the list, so the index method cannot find it. This will cause a ValueError exception, which is an error that occurs when a function or operation receives an argument that has the right type but an inappropriate value. The code does not handle the exception, and therefore it will terminate with an error message.
The expected result of the code is an unhandled exception, because the code tries to find a value that does not exist in the list. Therefore, the correct answer is C. The code raises an unhandled exception.
NEW QUESTION # 26
Python Is an example of which programming language category?
- A. assembly
- B. interpreted
- C. compiled
- D. machine
Answer: B
Explanation:
Explanation
Python is an interpreted programming language, which means that the source code is translated into executable code by an interpreter at runtime, rather than by a compiler beforehand. Interpreted languages are more flexible and portable than compiled languages, but they are also slower and less efficient. Assembly and machine languages are low-level languages that are directly executed by the hardware, while compiled languages are high-level languages that are translated into machine code by a compiler before execution.
NEW QUESTION # 27
What is the expected output of the following code?
- A. 0
- B. 1
- C. The code outputs nothing.
- D. 2
Answer: B
Explanation:
Explanation
The code snippet that you have sent is checking if two numbers are equal and printing the result. The code is as follows:
num1 = 1 num2 = 2 if num1 == num2: print(4) else: print(1)
The code starts with assigning the values 1 and 2 to the variables "num1" and "num2" respectively. Then, it enters an if statement that compares the values of "num1" and "num2" using the equality operator (==). If the values are equal, the code prints 4 to the screen. If the values are not equal, the code prints 1 to the screen.
The expected output of the code is 1, because the values of "num1" and "num2" are not equal. Therefore, the correct answer is C. 1.
NEW QUESTION # 28
What is the expected output of the following code?
- A. ('Fermi ', '2021', 'False')
- B. The code raises an unhandled exception.
- C. False
- D. 0
Answer: A
Explanation:
Explanation
The code snippet that you have sent is defining and calling a function in Python. The code is as follows:
def runner(brand, model, year): return (brand, model, year)
print(runner("Fermi"))
The code starts with defining a function called "runner" with three parameters: "brand", "model", and "year".
The function returns a tuple with the values of the parameters. A tuple is a data type in Python that can store multiple values in an ordered and immutable way. A tuple is created by using parentheses and separating the values with commas. For example, (1, 2, 3) is a tuple with three values.
Then, the code calls the function "runner" with the value "Fermi" for the "brand" parameter and prints the result. However, the function expects three arguments, but only one is given. This will cause a TypeError exception, which is an error that occurs when a function or operation receives an argument that has the wrong type or number. The code does not handle the exception, and therefore it will terminate with an error message.
However, if the code had handled the exception, or if the function had used default values for the missing parameters, the expected output of the code would be ('Fermi ', '2021', 'False'). This is because the function returns a tuple with the values of the parameters, and the print function displays the tuple to the screen.
Therefore, the correct answer is D. ('Fermi ', '2021', 'False').
NEW QUESTION # 29
......
Get Top-Rated Python Institute PCEP-30-02 Exam Dumps Now: https://www.ipassleader.com/Python-Institute/PCEP-30-02-practice-exam-dumps.html
Pass Your PCEP-30-02 Dumps Free Latest Python Institute Practice Tests: https://drive.google.com/open?id=1vQ9L2UAqr996b9TOqzWIvCQBX7Tg2xER