Get New 2021 Valid Practice To your DES-1221 Exam (Updated 62 Questions)
DCS-IE DES-1221 Exam Practice Test Questions Dumps Bundle!
NEW QUESTION 11
What does the data import session Pause operation do?
- A. Deactivates the host to PowerStore data path
- B. Stops the source to PowerStore background copy operation
- C. Stops the source to PowerStore cutover operation
- D. Deactivates the host to PowerStore control path
Answer: B
Explanation:
Reference:
guid=guid-a19dffc3-8def-4a50-a4ed-14650500f567&lang=en-us
Topic 1, Exam Part 2 - Performance-based Questions
Part 2 of this exam contains 6 performance-based questions. You will need to run the PowerStore Test Simulator to correctly answer the questions. You invoke the simulator by clicking on one of the two buttons shown below. (Some questions use the Launch Simulator button; some questions use the Start Simulator button.)
NEW QUESTION 12
How many cables are required for minimum support for PowerStore T Front-End storage connectivity?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION 13
Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?
- A. SOAP
- B. VASA
- C. REST
- D. VAAI
Answer: B
Explanation:
VASA is a VMware-defined API meant to provide a common way for VMware to integrate with storage vendors. The API is implemented using an out-of-band, Simple Object Access Protocol (SOAP) over HTTPS.
NEW QUESTION 14
What is a requirement for the Import External Storage migration feature?
- A. PowerPath host-based multipathing software
- B. PowerStore Global Storage Discovery IP address must be configured
- C. Direct Fibre Channel connections between storage systems
- D. PowerStore LACP bonded ports are tagged for replication
Answer: B
Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/general-requirements- for-importing-data?guid=guid-3b7c512c-55c4-43cc-9b57-3d22eaa85d5c&lang=en-us
NEW QUESTION 15
What is the maximum number of snapshot rules per cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 16
A VM administrator uses their PowerStore user account and noticed they are unable to change their password.
Why?
- A. Extended schema for Unix users in Active Directory not set
- B. VM Administrator role cannot set password
- C. In settings > users: enable allow user to change password not set
- D. Validate user in Active Directory not set
Answer: C
NEW QUESTION 17
Refer to the Exhibit.
A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?
- A. Port 54 needs to be enabled
- B. Port 54 has not been set to trunk mode
- C. Discovery network uses only native VLAN
- D. Dedicated port needs to be used for discovery network
Answer: D
NEW QUESTION 18
A storage administrator has configured the addition of a VNX2 as a remote system for migration.
Which Import External Storage migration feature architectural components are now established?
- A. Data path and management control path to the source storage system
- B. Data path and management control path to the access host
- C. Host iSCSI initiators are registered on the VNX2 storage system
- D. Host Fibre Channel initiators are registered on the VNX2 storage system
Answer: A
NEW QUESTION 19
Which type of network is used for storage migration between appliances?
- A. Inter-node network
- B. Intra-Cluster Management network
- C. Intra-Cluster Data network
- D. Storage network
Answer: C
NEW QUESTION 20
A storage administrator has provisioned a 50GB volume and presented it to an application. The application owner has requested that the volume be replicated to a secondary array. Which policy should be assigned to the volume to enable replication?
- A. Performance
- B. Replication
- C. Protection
- D. Remote
Answer: C
NEW QUESTION 21
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore T?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 22
What is the total number of NVRAM devices used in PowerStore 3000?
- A. Up to 6
- B. 0
- C. Up to 21
- D. 1
Answer: D
NEW QUESTION 23
An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?
- A. Imported LUN is deleted from the VNX2
- B. Storage Group containing the imported LUN is deleted
- C. Imported LUN is removed from the VNX2 Storage Group
- D. Host is removed from the VNX2 Storage Group
Answer: C
Explanation:
Explanation/Reference: https://laptrinhx.com/what-is-dell-emc-powerstore-part-7-importing-external-storage-
146661351/
NEW QUESTION 24
What does the remote replication Failover operation do?
- A. Fully synchronizes the source and destination data states and stops the current replication session
- B. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
- C. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
- D. Fully synchronizes the source and destination data states and reverses the replication direction
Answer: B
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-25-dae/pwrstr-protect-data/replication?
guid=guid-7641aeec-982e-4e4e-85fb-c50f525635db&lang=en-us
NEW QUESTION 25
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore T?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 26
What is the logical block size when creating and formatting volumes on PowerStore for Windows hosts?
- A. 520 bytes
- B. 512 bytes
- C. 64 kilobytes
- D. 4096 bytes
Answer: B
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-hcg/disk-formatting?guid=guid-
27740e37-8432-4241-a3d7-bf18843a94ce&lang=en-us
NEW QUESTION 27
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?
- A. Implement VLT and Dynamic Link Aggregation Group
- B. Implement Dynamic Link Aggregation Group
- C. Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group
- D. Configure VLT and Link Aggregation Control Protocol
Answer: D
Explanation:
Reference: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/h18157- dell-emc-powerstore-clustering-high-availability.pdf
NEW QUESTION 28
Match the correct Base Enclosure port in column A to the Expansion Enclosure port in column B to show the correct cabling for adding a single expansion enclosure to a base enclosure.
Answer:
Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-isg/cable-the-base-enclosure-to-the-expansion-enclosure?guid=guid-d68d049f-2b77-489f-b1ab-553f4f3de8aa&lang=en-us
NEW QUESTION 29
An administrator receives an alert on a PowerStore Cluster with three appliances:
The appliance A1 is projected to run out of space in 8 days Capacity utilization is above 90 percent
Which tools are available to assist the Administrator with a potential resolution?
- A. Thin provision conversion wizard
- B. System Optimization
- C. Assisted Migration
- D. Space reclamation wizard
Answer: C
NEW QUESTION 30
A SQL Cluster with attached PowerStore storage has Volumes SQL1, SQL2, SQL4, SQL5 which all require write order preservation. The SQL administrator no longer requires SQL4 and has removed it from the database. The Storage Administrator goes to delete volume SQL4 and finds that the option is grayed out.
Why is the option to delete the volume unavailable?
- A. SQL4 still has replications
- B. SQL4 is part of a volume group
- C. SQL4 was renamed from SQL3
- D. SQL4 still has snapshots
Answer: A
NEW QUESTION 31
......
Understanding functional and technical aspects of Specialist â Implementation Engineer, PowerStore Solutions Version 1.0 PowerStore Implementation (18%)
The following will be discussed in DELL DES-1221 dumps pdf:
- Discover and perform initial system configuration of PowerStore
- Describe and perform licensing process for PowerStore
- Rack and stack PowerStore systems
- Configure Ethernet switching for PowerStore
- Perform PowerStore installation planning
The appropriate audience includes those who use PowerStore systems to position, design, deploy, maintain and support solutions. To undertake this training, participants are advised to have skillsets that are similar to the prerequisites of the above course. By the end of the program, one will gain mastery in the following objectives:
- Capacity in initializing and deploying systems for PowerStore
- Administering storage resources as well as services for PowerStore
- Carrying out basic tasks in troubleshooting for PowerStore systems
- Upgrading hardware as well as software for PowerStore systems
- Ability to physically install as well as cable systems for PowerStore
The modules that will enable the coming up of such knowledge include physical installation, system initializing, configuration for deployment, and administration, among the rest.
Fully Updated Dumps PDF - Latest DES-1221 Exam Questions and Answers: https://www.ipassleader.com/EMC/DES-1221-practice-exam-dumps.html
Updated DES-1221 PDF for the DES-1221 Tests Free Updated Today: https://drive.google.com/open?id=1YGcM8gOroEiZWXauLMvhXSUM4VfeKlIT