[Dec-2021] Fortinet NSE6_FWF-6.4 Dumps – Reduce Your Chance of Failure in NSE6_FWF-6.4 Exam
To help you achieve your ultimate goal, we suggest the actual Fortinet NSE6_FWF-6.4 dumps for your Fortinet NSE 6 - Secure Wireless LAN 6.4 exam preparation to use as your guideline.
NEW QUESTION 18
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for WPA2 or 3 Enterprise
- B. A VAP configured for captive portal authentication
- C. A VAP configured to authenticate locally on FortiGate
- D. A VAP configured to authenticate using a radius server
Answer: A,D
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 19
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 64 Tunnel-Type
- E. 58 Egress-VLAN-Name
Answer: B,C,D
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION 20
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Multicast
- C. DHCP
- D. Broadcast
Answer: C
NEW QUESTION 21
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local standalone configuration option
- C. Configure a bridge mode wireless network and enable the Local authentication configuration option
- D. Install supported FortiAP and configure a bridge mode wireless network
Answer: A
NEW QUESTION 22
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
- A. DTLS encryption on wireless traffic must be turned off
- B. Wireless network security must be set to open
- C. Two wireless APs must be sending data
- D. SQL services must be running
Answer: C
Explanation:
FortiPresence VM is deployed locally on your site and consists of two virtual machines. All the analytics data collected and computed resides locally on the VMs.
NEW QUESTION 23
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Clone a suitable FortiAP profile and change the county code settings on the profile
- B. Configure the APs individually by overriding the settings in Managed FortiAPs
- C. Configure the controller for the correct country code for Germany
- D. Create a new FortiAP profile and change the county code settings on the profile
Answer: A
NEW QUESTION 24
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- B. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- C. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- D. Areas with the signal strength weaker than -68 dB are cut out of the map
Answer: B
NEW QUESTION 25
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiAP Cloud
- C. FortiSwitch
- D. FortiGate
Answer: B,D
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 26
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. An X.509 certificate to authenticate the client
- C. A WPA2 or WPA3 Enterprise wireless network
- D. An X.509 to authenticate the authentication server
- E. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
Answer: B,D
NEW QUESTION 27
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Data channels
- B. Control channels
- C. FortLink channels
- D. Security channels
Answer: A,B
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION 28
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Downstream link rate, the connection rate for the AP to the client
- C. The receive signal strength (RSS) of the client at the AP
- D. Upstream link rate, the connection rate for the client to the AP
Answer: C
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION 29
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Social networks authentication
- B. Short message service authentication
- C. Hardware security token authentication
- D. Software security token authentication
Answer: A,C
Explanation:
This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.
NEW QUESTION 30
......
100% Free NSE6_FWF-6.4 Demo-Trial [Pdf], get it now: https://drive.google.com/open?id=1zFd_qGy-mXHAs2CjEeEE_NQtx-LOQ8L3
Accurate & Verified Answers As Seen in the Real Exam here: https://www.ipassleader.com/Fortinet/NSE6_FWF-6.4-practice-exam-dumps.html