[Apr-2023] Juniper JN0-335 Dumps – Reduce Your Chance of Failure in JN0-335 Exam
To help you achieve your ultimate goal, we suggest the actual Juniper JN0-335 dumps for your Security, Specialist (JNCIS-SEC) exam preparation to use as your guideline.
NEW QUESTION # 57
What are three primary functions of JATP? (Choose three.)
- A. mitigation
- B. encryption
- C. optimization
- D. detection
- E. analytics
Answer: A,D,E
NEW QUESTION # 58
You are asked to convert two standalone SRX Series devices to a chassis cluster deployment. You must ensure that your IPsec tunnels will be compatibla with the new deployment.
In this scenario, which two interfaces should be used when binding your tunnel endpoints? (Choose two.)
- A. lo0
- B. ge
- C. reth
- D. pp0
Answer: B,C
NEW QUESTION # 59
The AppQoE module of AppSecure provides which function?
- A. The AppQoE module provides application-based routing.
- B. The AppQoE module provides routing, based on network conditions.
- C. The AppQoE module blocks access to risky applications.
- D. The AppQoE module prioritizes important applications.
Answer: B
NEW QUESTION # 60
You want to permit access to an application but block application sub-Which two security policy features provide this capability? (Choose two.)
- A. micro application detection
- B. URL filtering
- C. APPID
- D. content filtering
Answer: A,B
Explanation:
The two security policy features that provide the capability to permit access to an application but block its sub-applications are URL filtering and micro application detection. URL filtering allows you to create policies that permit or block access to certain websites or webpages based on URL patterns. Micro application detection is a more sophisticated approach that can identify and block specific applications, even if they are embedded within other applications or websites. According to the Juniper Networks Certified Internet Specialist (JNCIS-SEC) Study Guide [1], "micro application detection is the most accurate way to detect and control applications." Content filtering and APPID are more general approaches and are not as effective in providing the level of granularity needed to block sub-applications.
NEW QUESTION # 61
Which three statements are correct about fabric interfaces on the SRX5800? (Choose three.)
- A. Fabric interfaces must be same interface type.
- B. Fabric interfaces must be system-assigned interfaces.
- C. Fabric interfaces must be user-assigned interfaces.
- D. Fabric interfaces must be on the same Layer 2 segment.
- E. Fabric interfaces must have a user-assigned IP address.
Answer: A,B,D
NEW QUESTION # 62
When considering managed sessions, which configuration parameter determines how full the session table must be to implement the early age-out function? (Choose two)
- A. low watermark
- B. session service timeout
- C. policy rematch
- D. high waremark
Answer: B,D
NEW QUESTION # 63
You are deploying a vSRX into a vSphere environment which applies the configuration from a bootable ISO file containing the juniper.conf file. After the vSRX boots and has the configuration applied, you make additional device specific configuration changes, commit, and reboot the device. Once the device finishes rebooting, you notice the specific changes you made are missing but the original configuration is applied.
In this scenario, what is the problem?
- A. Configuration changes do not persist after reboots on vSRX.
- B. The juniper.conf file was not applied to the vSRX.
- C. The ISO file is still mounted on the vSRX.
- D. The configuration file is corrupt.
Answer: C
NEW QUESTION # 64
A routing change occurs on an SRX Series device that involves choosing a new egress interface.
In this scenario, which statement is true for all affected current sessions?
- A. The current sessions are torn down and go through first path processing based on the new route.
- B. The current sessions do not change.
- C. The current sessions might change based on the corresponding security policy.
- D. The current session are torn dowm only if the policy-rematch option has been enabled.
Answer: B
NEW QUESTION # 65
After JSA receives external events and flows, which two steps occur? (Choose two.)
- A. After formatting the data, the data is stored in an asset database.
- B. Before formatting the data, the data is analyzed for relevant information.
- C. After the information is filtered, JSA responds with active measures
- D. Before the information is filtered, the information is formatted
Answer: B,D
Explanation:
Before formatting the data, the data is analyzed for relevant information. This is done to filter out any irrelevant data and to extract any useful information from the data. After the information is filtered, it is then formatted so that it can be stored in an asset database. After the data has been formatted, JSA will then respond with active measures.
NEW QUESTION # 66
Which two statements are correct about Juniper ATP Cloud? (Choose two.)
- A. Once the target threshold is met, Juniper ATP Cloud continues looking for threats levels range from 0 to 10 minutes.
- B. The threat levels range from 0-10.
- C. Once the target threshold is met, Juniper ATP Cloud continues looking for threats from 0 to 5 minutes.
- D. The threat levels range from 0-100.
Answer: B,C
Explanation:
According to the Juniper Networks JNCIS-SEC Study Guide, Juniper ATP Cloud sets target thresholds for security events and then continuously scans the environment for any activity that exceeds this threshold. Once the threshold is met, Juniper ATP Cloud continues looking for threats for a period of 0 to 5 minutes. The threat levels range from 0 to 10, with 0 being the lowest and 10 being the highest.
NEW QUESTION # 67
Which solution enables you to create security policies that include user and group information?
- A. Network Director
- B. JIMS
- C. ATP Appliance
- D. NETCONF
Answer: B
Explanation:
The solution that enables you to create security policies that include user and group information is JIMS (Juniper Identity Management Service). JIMS collects and maintains a large database of user, device, and group information from Active Directory domains or syslog sources, and enables SRX Series devices to rapidly identify thousands of users in a large, distributed enterprise. With JIMS, you can create security policies that include user and group information, and enforce user-based access control policies to protect network resources.
NEW QUESTION # 68
Click the Exhibit button.
You have configured the scheduler shown in the exhibit to prevent users from accessing certain websites from 1:00 PM to 3:00 PM Monday through Friday. This policy will remain in place until further notice. When testing the policy, you determine that the websites are still accessible during the restricted times.
In this scenario, which two actions should you perform to solve the problem? (Choose two.)
- A. Use the PM parameter when specifying the time in the schedule.
- B. Use the start-date parameter to specify the date for each Monday and use the stop-date parameter to specify the date for each Friday.
- C. Add the saturday exclude parameter and the sunday exclude parameter to ensure weekends are excluded from the schedule.
- D. Use the 13:00 parameter and the 15:00 parameter when specifying the time.
Answer: C,D
NEW QUESTION # 69
Which three statements are true about the difference between cSRX-based virtual security deployments and vSRX-based virtual security deployments? (Choose three.)
- A. cSRX requires less storage and memory space for a given deployment than vSRX-based solutions.
- B. vSRX provides faster deployment time and faster reboots compared to cSRX.
- C. vSRX provides Layer 2 to Layer 7 secure services and cSRX provides Layer 4 to Layer 7 secure services.
- D. vSRX and cSRX both provide Layer 2 to Layer 7 secure services.
- E. cSRX-based solutions are more scalable than vSRX-based solutions.
Answer: A,C,E
NEW QUESTION # 70
Exhibit
When trying to set up a server protection SSL proxy, you receive the error shown. What are two reasons for this error? (Choose two.)
- A. The SSL proxy certificate ID does not exist.
- B. The SSL proxy certificate ID does not have the correct renegotiation option set.
- C. The SSL proxy certificate ID is for a forwarding proxy.
- D. The SSL proxy certificate ID is part of a blocklist.
Answer: A,D
Explanation:
Two possible reasons for this error are that the SSL proxy certificate ID does not exist, or the SSL proxy certificate ID is part of a blocklist. If the SSL proxy certificate ID does not exist, you will need to generate a new certificate. If the SSL proxy certificate ID is part of a blocklist, you will need to contact the source of the blocklist to remove it. Additionally, you may need to check that the SSL proxy certificate ID has the correct renegotiation option set, as this is necessary for proper server protection. For more information, you can refer to the Juniper Security documentation at https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/security-ssl-proxy-configuration.html.
NEW QUESTION # 71
Which two settings must be enabled on the hypervisor in a vSRX deployment to ensure proper chassis cluster operation? (Choose two.)
- A. Control links must have an MTU of 9000.
- B. Control links must operate in promiscuous mode.
- C. Fabric links must have an MTU of 9000.
- D. Fabric links must operate in promiscuous mode.
Answer: B,C
NEW QUESTION # 72
Your network uses a remote e-mail server that is used to send and receive e-mails for your users.
In this scenario, what should you do to protect users from receiving malicious files thorugh e-mail?
- A. Deploy Sky ATP MAPI e-mail protection
- B. Deploy Sky ATP SMTP e-mail protection
- C. Deploy Sky ATP IMAP e-mail protection
- D. Deploy Sky ATP POP3 e-mail protection
Answer: B
NEW QUESTION # 73
Click the Exhibit button.
You are configuring an SRX chassis cluster with the node-specific hostname and management address. Referring to the exhibit, which configuration completes this requirement?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 74
Which two statements about SRX chassis clustering are correct? (Choose two.)
- A. SRX chassis clustering only supports active/passive for the data plane.
- B. SRX chassis clustering supports active/passive and active/active for the data plane.
- C. SRX chassis clustering supports active/passive for the control plane.
- D. SRX chassis clustering supports active/active for the control plane.
Answer: B,D
Explanation:
SRX chassis clustering supports active/passive and active/active for the data plane. In an active/active configuration, both cluster members process and forward traffic, which increases throughput and provides redundancy. For the control plane, SRX chassis clustering supports active/active, meaning that both cluster members can process and forward control traffic, providing redundancy and improved scalability
NEW QUESTION # 75
Exhibit
You are asked to ensure that servers running the Ubuntu OS will not be able to update automatically by blocking their access at the SRX firewall. You have configured a unified security policy named Blockuburrtu, but it is not blocking the updates to the OS.
Referring to the exhibit which statement will block the Ubuntu OS updates?
- A. Change the default policy to permit-all.
- B. Configure the Allowweb policy to have a dynamic application of any.
- C. Move the Blockubuntu policy after the Allowweb policy.
- D. Configure the Blockubuntu policy with the junos-https application parameter.
Answer: D
NEW QUESTION # 76
Exhibit
Referring to the exhibit, what do you determine about the status of the cluster.
- A. Node 2 is down.
- B. There are no issues with the cluster.
- C. Both nodes determine that they are in a primary state.
- D. Node 1 is down
Answer: A
NEW QUESTION # 77
What information does encrypted traffic insights (ETI) use to notify SRX Series devices about known malware sites?
- A. certificates
- B. MAC addresses
- C. domain names
- D. dynamic address groups
Answer: C
Explanation:
Encrypted traffic insights (ETI) uses domain names to notify SRX Series devices about known malware sites. ETI is a feature of the SRX Series firewall that can detect and block malware that is hidden in encrypted traffic. It works by analyzing the domain names of the websites that the encrypted traffic is attempting to access. If the domain name matches a known malware site, ETI will send an alert to the SRX Series device, which can then take appropriate action to block the traffic. ETI is a useful tool for protecting against threats that attempt to evade detection by hiding in encrypted traffic.
NEW QUESTION # 78
......
100% Free JN0-335 Demo-Trial [Pdf], get it now: https://drive.google.com/open?id=1MwXJr9q4rlEF8f9OiVKPaf3gal5vY9rn
Accurate & Verified Answers As Seen in the Real Exam here: https://www.ipassleader.com/Juniper/JN0-335-practice-exam-dumps.html