2021 500-220 exam torrent 500-220 Study Guide
Easily pass 500-220 Exam with our Dumps & PDF Test Engine
NEW QUESTION 25
What happens to an unsupervised iOS device when the "Meraki management" profile is removed?
- A. The "Meraki management" profile is removed and then pushed automatically by Systems Manager.
- B. The "Meraki management" profile cannot be removed.
- C. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed are also removed.
- D. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed remain.
Answer: C
NEW QUESTION 26
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
- A. MS Switch
- B. MV Smart Camera
- C. Meraki Insight
- D. MR Access Point
Answer: D
NEW QUESTION 27
Which information do the MXs in a High Availability pair share?
- A. time synchronization state
- B. stateful firewall database
- C. DHCP association database
- D. spanning-tree state
Answer: D
NEW QUESTION 28
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The application requires the most recent iOS version.
- B. The device cannot connect to Apple servers.
- C. The device is locked with a passcode.
- D. The device cannot connect to Cisco Meraki servers.
Answer: C
NEW QUESTION 29
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Dual band operating with Band Steering
- B. Content filtering
- C. 802.11r
- D. Bridge mode
Answer: A
NEW QUESTION 30
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring the preserved event period to unlimited.
- B. Configuring Dashboard logging to preserve only certain event types.
- C. Configuring the preserved event number to maximize logging.
- D. Configuring a syslog server for the network.
Answer: C
NEW QUESTION 31
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. No configuration step is necessary; automatic updating is the default behavior.
- B. Create a security policy that enables automatic updates.
- C. Configure automatic updating of iOS devices in the Meraki installed profile.
- D. Create a profile with automatic update enabled and apply it to iOS devices.
Answer: B
NEW QUESTION 32
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
- B. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
- C. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- D. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- E. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
Answer: B,D
Explanation:
Reference:
Organization_Menu/Manage_Tags
NEW QUESTION 33
Refer to the exhibit.
Which outcome occurs when logging is set to Enabled?
- A. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.
- B. The hits counter within this section is now enabled.
- C. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
- D. This firewall rule is now enabled.
Answer: A
NEW QUESTION 34
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Remote Desktop
- B. OS updates
- C. Send notification
- D. Selective wipe
- E. Screenshot
Answer: A,D
NEW QUESTION 35
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. ADD
- B. POST
- C. PUT
- D. GET
- E. SET
- F. PATCH
Answer: B,C,D
Explanation:
Reference:
Cisco_Meraki_Dashboard_API
NEW QUESTION 36
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- B. Peers contact the VPN registry at TCP port 9350.
- C. For IPsec tunneling, peers use UDP ports 500 and 4500.
- D. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- E. Peers contact the VPN registry at UDP port 9350.
Answer: A,E
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION 37
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. quarantine
- B. prevention
- C. detection
- D. blocking
Answer: B
NEW QUESTION 38
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs stop functioning in 30 days.
- B. One AP Immediately stops functioning.
- C. All APs immediately stop functioning.
- D. All network devices stop functioning in 30 days.
Answer: D
NEW QUESTION 39
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
NEW QUESTION 40
Which information is used to calculate whether a WAN link has high usage?
- A. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
- B. total historical throughput of an uplink
- C. data under Security & SD WAN > Appliance Status > Uplink > Live Data
- D. total number of devices that are actively passing traffic
Answer: A
NEW QUESTION 41
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. The packet is stopped.
- B. Not enough detail is available to determine the next hop.
- C. The Auto VPN peer "Store 1532 - appliance" is the next hop.
- D. The concentrator gateway (10.128.124.62) is the next hop.
Answer: B
NEW QUESTION 42
Refer to the exhibit.
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
- A. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
- B. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
- C. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
- D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
Answer: D
NEW QUESTION 43
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. lowest VLAN ID that is configured and set to YES to use VPN
- B. highest VLAN ID that is configured and set to YES to use VPN
- C. highest VLAN ID that is configured and set to NO to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: B
Explanation:
Reference:
Using_the_Ping_Live_Tool
NEW QUESTION 44
How is high-availability supported for Cisco Meraki devices?
- A. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
- B. Only the MX Security Appliances that use VRRP support high availability.
- C. An active/active high-availability pair is recommended for MX Security Appliances.
- D. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
Answer: B
Explanation:
Reference:
_High_Availability_Pair
NEW QUESTION 45
What is the role of the Meraki Dashboard as the service provider when using SAML for single sign-on to the Dashboard?
- A. The Dashboard parses the SAML request and authenticates users.
- B. The Dashboard generates the SAML request.
- C. The Dashboard provides user access credentials.
- D. The Dashboard generates the SAML response.
Answer: B
NEW QUESTION 46
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients cannot connect.
- B. Currently associated clients stay connected.
- C. Currently associated clients are affected by restrictive traffic shaping rules.
- D. New clients can connect.
- E. Currently associated clients are disconnected.
Answer: A,E
NEW QUESTION 47
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 2 as long as it is up.
- B. WebEx traffic will be load-balanced between both active WAN links.
- C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- D. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
Answer: C
NEW QUESTION 48
......
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
500-220 PDF Pass Leader, 500-220 Latest Real Test: https://www.ipassleader.com/Cisco/500-220-practice-exam-dumps.html
Valid 500-220 Test Answers & 500-220 Exam PDF: https://drive.google.com/open?id=14Hzh_CWzN02M1or0XPK6xMJ3kMOs0ICx