Round-the-clock service

To fulfill our dream of helping our users get the H3C certification more efficiently, we are online to serve our customers 24 hours a day and 7 days a week. Therefore, whenever you have problems in studying our GB0-381-ENU test training, we are here for you. You can contact with us through e-mail or just send to our message online. And unlike many other customer service staff who have bad temper, our staff are gentle and patient enough for any of your problems in practicing our GB0-381-ENU study torrent. In addition, we have professional personnel to give you remote assistance in case that you should have any professional issue to consult us.

It is universally acknowledged that H3C certification can help present you as a good master of some knowledge in certain areas, and it also serves as an embodiment in showcasing one's personal skills. However, it is easier to say so than to actually get the H3C certification. We have to understand that not everyone is good at self-learning and self-discipline, and thus many people need outside help to cultivate good study habits, especially those who have trouble in following a timetable. To handle this, our GB0-381-ENU test training will provide you with a well-rounded service so that you will not lag behind and finish your daily task step by step. At the same time, our GB0-381-ENU study torrent will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our GB0-381-ENU study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our GB0-381-ENU test training better.

DOWNLOAD DEMO

A promising future with certification

It is of no exaggeration to say that sometimes a certification is exactly a stepping-stone to success, especially when you are hunting for a job. The GB0-381-ENU study materials are of great help in this sense. People with initiative and drive all want to get a good job, and if someone already gets one, he or she will push for better position and higher salaries. With the GB0-381-ENU test training, you can both have the confidence and gumption to ask for better treatment. To earn such a material, you can spend some time to study our GB0-381-ENU study torrent. No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one.

Updating study materials for free

We are aimed to develop a long-lasting and reliable relationship with our customers who are willing to purchase our GB0-381-ENU study materials. To enhance the cooperation built on mutual-trust, we will renovate and update our system for free so that our customers can keep on practicing our GB0-381-ENU study materials without any extra fee. Meanwhile, to ensure that our customers have greater chance to pass the exam, we will make our GB0-381-ENU test training keeps pace with the digitized world that change with each passing day. In this way, our endeavor will facilitate your learning as you can gain the newest information on a daily basis and keep being informed of any changes in GB0-381-ENU test. Therefore, our customers can save their limited time and energy to stay focused on their study as we are in charge of the updating of our GB0-381-ENU test training. It is our privilege and responsibility to render a good service to our honorable customers.

H3C GB0-381-ENU Exam Syllabus Topics:

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

Question 1

In a certain network project, the customer considers that the network users may increase significantly in the future, so the network is required to have better scalability.
Which of the following measures can improve the scalability of the network?

A. use routing policy to change routing attributes
B. Use RIP protocol as routing protocol
C. Use VLSM to divide IP addresses
D. Deploy data encryption between core and remote branches

Question 2

In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
rtb-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
rtc]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.0]area 2
RTC-ospf-1-area-0.0.0.2]nssa no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.2]network 3.3.3.3 0.0.0.0
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
rtd-ospf-1-area-0.0.0.2]nssa
RTD-ospf-1]import-route direct
Which of the following routes _______ cannot exist in the RTD's routing table.

A. 2.2.2.2/32
B. 1.1.1.1/32
C. 3.3.3.3/32
D. 0.0.0.0/0

Question 3

According to the topology shown in the figure, the OSPF router type for RTE is ________.

A. ABR
B. Backbone router
C. Intra-area router
D. ASBR

Question 4

For the networking and applicable scenarios of IS-IS and OSPF, the correct one in the following description is ______.

A. Although both support large-scale hierarchical networks, OSPF is more widely used in enterprise-level networks
B. The IS-IS backbone area consists of all Level-2 and Level-1-2 systems. Because there is no virtual connection, it is required to be physically continuous.
C. The protocol packets of IS-IS are in TLV format, which is easy to expand and support various network protocols, such as IPv6; while the protocol packets of OSPFv2 are based on IP, and the combination with IPv4 is too tight, so it is difficult to expand support IPv6
D. The backbone area number of OSPF must be 0, and it must be continuous, and its continuity can be guaranteed through virtual links

Question 5

In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 0
RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
RTB] ospf 1 router-id 2.2.2.2
RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
RTB-ospf-1] area 1
RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1] vlink-peer 3.3.3.3
RTC] ospf 1 router-id 3.3.3.3
RTC-ospf-1] area 1
RTC-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTC-ospf-1-area-0.0.0.1] network 3.3.3.3 0.0.0.0
RTC-ospf-1-area-0.0.0.1] vlink-peer 2.2.2.2
RTC-ospf-1] area 2
RTC-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD] ospf 1 router-id 4.4.4.4
RTD-ospf-1] area 2
RTD-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2] network 4.4.4.4 0.0.0.0
Then the router type in the RTC in the OSPF area is _______

A. ABR
B. Backbone router
C. Intra-area router
D. ASBR

Solutions: