Round-the-clock service

To fulfill our dream of helping our users get the Microsoft certification more efficiently, we are online to serve our customers 24 hours a day and 7 days a week. Therefore, whenever you have problems in studying our 070-544 test training, we are here for you. You can contact with us through e-mail or just send to our message online. And unlike many other customer service staff who have bad temper, our staff are gentle and patient enough for any of your problems in practicing our 070-544 study torrent. In addition, we have professional personnel to give you remote assistance in case that you should have any professional issue to consult us.

It is universally acknowledged that Microsoft certification can help present you as a good master of some knowledge in certain areas, and it also serves as an embodiment in showcasing one's personal skills. However, it is easier to say so than to actually get the Microsoft certification. We have to understand that not everyone is good at self-learning and self-discipline, and thus many people need outside help to cultivate good study habits, especially those who have trouble in following a timetable. To handle this, our 070-544 test training will provide you with a well-rounded service so that you will not lag behind and finish your daily task step by step. At the same time, our 070-544 study torrent will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our 070-544 study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our 070-544 test training better.

DOWNLOAD DEMO

Updating study materials for free

We are aimed to develop a long-lasting and reliable relationship with our customers who are willing to purchase our 070-544 study materials. To enhance the cooperation built on mutual-trust, we will renovate and update our system for free so that our customers can keep on practicing our 070-544 study materials without any extra fee. Meanwhile, to ensure that our customers have greater chance to pass the exam, we will make our 070-544 test training keeps pace with the digitized world that change with each passing day. In this way, our endeavor will facilitate your learning as you can gain the newest information on a daily basis and keep being informed of any changes in 070-544 test. Therefore, our customers can save their limited time and energy to stay focused on their study as we are in charge of the updating of our 070-544 test training. It is our privilege and responsibility to render a good service to our honorable customers.

A promising future with certification

It is of no exaggeration to say that sometimes a certification is exactly a stepping-stone to success, especially when you are hunting for a job. The 070-544 study materials are of great help in this sense. People with initiative and drive all want to get a good job, and if someone already gets one, he or she will push for better position and higher salaries. With the 070-544 test training, you can both have the confidence and gumption to ask for better treatment. To earn such a material, you can spend some time to study our 070-544 study torrent. No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one.

Microsoft TS: Ms Virtual Earth 6.0, Application Development Sample Questions:

1. A Web site displays a Virtual Earth 6.0 map in two-dimensional mode. You need to display data legends on the Virtual Earth map by using a custom control. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A) Add the data legends to the HTML element. Call the VEMap.AddControl method.
B) Use the document.CreateElement method of the Document Object Model (DOM) to create a new HTML element.
C) Create an IFRAME element that has the same size and the same location as the custom control. Set the value of the frameborder property of the IFRAME element to 0 and the value of the scrolling property to no.
D) Loop through the Document Object Model (DOM) of your application. Insert the data legend as a child of the DIV element that contains the Virtual Earth map.
E) In the style property for the IFRAME element, set the value of the z-index attribute to 1 and the position settings to match those of your control. In the style property for your custom control, set the value of the z-index attribute to a number greater than 1.

2. You need to draw a straight red line between the start and end points of a calculated route.
Which code segment should you use?

A) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0)); shape.HideIcon(); layer.AddShape(shape);
B) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len-1].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0.5)); shape.HideIcon(); layer.AddShape(shape);
C) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[1].LatLong);
locationArray.push(route.Itinerary.Segments[len].LatLong); shape = new
VEShape(VEShapeType.Pushpin, locationArray); shape.SetLineColor(new VEColor(255,
0, 0, 0.5)); layer.AddShape(shape);
D) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len-1].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0)); layer.AddShape(shape);

3. You need to add a default pushpin as a shape to the base map layer at a specific latitude and longitude. Which code segment should you use?

A) var shape = new VEShape(VEShapeType.Pushpin, new VELatLong(0,0));
shape.SetTitle('My pushpin'); shape.SetDescription('This is a default shape'); shape.SetPoints([new VELatLong(latitude,longitude)]); map.AddShape(shape);
B) var shape = map.AddPushpin(map.GetCenter()); shape.SetTitle('My pushpin'); shape.SetDescription('This is a default shape');
C) var shapeLayer = new VEShapeLayer(); map.AddShapeLayer(shapeLayer); var shape
= new VEShape(VEShapeType.Pushpin, new VELatLong(latitude,longitude));
shape.SetTitle('My pushpin'); shape.SetDescription('This is a default shape'); shapeLayer.AddShape(shape);
D) var shape = new VEShape(VEShapeType.Pushpin, map.GetCenter());
shape.SetTitle('My pushpin'); shape.SetDescription('This is a default shape'); map.AddShape(shape);

4. You need to draw a straight red line between the start and end points of a calculated route.
Which code segment should you use?

A) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0)); shape.HideIcon(); layer.AddShape(shape);
B) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len-1].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0.5)); shape.HideIcon(); layer.AddShape(shape);
C) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[1].LatLong);
locationArray.push(route.Itinerary.Segments[len].LatLong); shape = new
VEShape(VEShapeType.Pushpin, locationArray); shape.SetLineColor(new VEColor(255,
0, 0, 0.5)); layer.AddShape(shape);
D) var locationArray = new Array(); var len = route.Itinerary.Segments.length; locationArray.push(route.Itinerary.Segments[0].LatLong);
locationArray.push(route.Itinerary.Segments[len-1].LatLong); shape = new
VEShape(VEShapeType.Polyline, locationArray); shape.SetLineColor(new VEColor(255, 0,
0, 0)); layer.AddShape(shape);

5. You are creating a Web application by using the Virtual Earth 6.0 map control. A Web page of the application loads two map controls named Map1 and Map2. Map1 displays a navigable, primary map. Map2 is the secondary instance of Map1 and displays an overview of the primary map. You need to ensure that when the user navigates the primary map, the overview is automatically updated. Which code segment should you use?

A) Map2 = new VEMap('myMap'); Map2.LoadMap(); Map2.SetMapView(defView1);
Map2.AttachEvent("onresize", UpdateOverview);
B) Map1 = new VEMap('myMap'); Map1.LoadMap(); Map1.SetMapView(defView1);
Map1.AttachEvent("onchangeview", UpdateOverview);
C) Map1 = new VEMap('myMap'); Map1.LoadMap(); Map1.SetMapView(defView1);
Map1.AttachEvent("onresize", UpdateOverview);
D) Map2 = new VEMap('myMap'); Map2.LoadMap(); Map2.SetMapView(defView1);
Map2.AttachEvent("onchangeview", UpdateOverview);

Solutions: